Armory Sponsor
Posted: 7/19/2025 10:20:36 PM EDT
| Can someone recommend a decent chamber reamer for 22lr? I don’t need the absolute best, this isn’t for a match grade tack driver. I do need to get through 10 barrel blanks (plus and screw ups) with it though Thanks in advance. |
|
I have a clymer and it works great. Very sharp and cut very easily. Use lots of oil, cut only a little at a time, clean off the chips and go again. I got the "match" reamer and have cut 2 chambers with it so far and both are prefect when inspected with a bore scope. |
|
Manson or clymer. Both are affordable and will easily do 20+ chambers. If you want to go cheap, ebay has imports from China and Ukraine. May or may not do your 10. |
A firearm is like a parachute, if you need one but don't have one, you'll probably never need one again. IG @jimstagramguns
|
Originally Posted By oxford411: Is a finishing reamer good enough or do you need to go in with a roughing reamer and then the finishing one? These will be previously uncut chambers in barrel blanks. Finishing reamer will cut a 22lr chamber without the need for a roughing reamer. |
A firearm is like a parachute, if you need one but don't have one, you'll probably never need one again. IG @jimstagramguns
Armory Sponsor