Armory Sponsor
Posted: 1/21/2017 8:15:37 PM EDT
|
Form 1 is almost ready to go out.
The Zmachine 60 degree cups, anyone have a dimension for the 1.347 cups. I have on order a Trap kit from SD tactical 9.6", and trying to get an idea of how many I am going to need. Trying to keep it as light as possible since it is going to be large. Also would it be beneficial to use SS for the first cup and Ti for the rest. It is going to be used with the Griffin Mounting system. Thanks Dave |
|
Zmachine should have the dimensions on their website. What caliber is it for? If for 5.56 or any supers you might want to use SS for the first one or two cones. If you only plan on shooting sub-sonic 300BLK all titanium cones will be fine.
ETA: Nevermind, they have the dimensions for the size I bought but not the size you want. Shoot them an email. |
|
Quoted:
I'd hold off a month and see if the HPA goes through. If it does, suppressors will be treated like regular firearms, no stamps required. It may work out that way. Have an SBR form 1 going out first. As much as I hope it passes I am not holding my breath. It looks like the SDT Ti tube takes a 1.355 cup and they have the skirt size at .668. Appreciate the help. |
|
Quoted:
I'd hold off a month and see if the HPA goes through. If it does, suppressors will be treated like regular firearms, no stamps required. While I know it's a priority for the NRA, I'm not sure I see Congress tackling this issue early on, I wouldn't expect any traction for at least several months. There are lots of cosponsors in the House, but not many in the Senate, last I looked. |
|
Quoted:
While I know it's a priority for the NRA, I'm not sure I see Congress tackling this issue early on, I wouldn't expect any traction for at least several months. There are lots of cosponsors in the House, but not many in the Senate, last I looked. Kind of what I was thinking. Regardless of the HPA I will have the process rolling on this. As soon as the check is cashed on My F1 SBR the F1 is going in on this one. |
Armory Sponsor