Armory Sponsor
Posted: 1/31/2020 11:30:43 AM EDT
|
*Hear* me out (pun intended). I've recently started shooting subsoincs after picking up my SRD762 direct thread around Christmas time, and my favorite thing thus far is actually the 7.62x39, even over 300BLK (I know I just lost some of you already, sorry).
I'm getting some Maker 190gr and 208gr .310 slow velocity expansion rounds soon. I had amazing luck with my 182gr FMJ round nose, and I'd like to keep using Trail Boss. I have 1:10 twist, so both of these heavy bullets make me worried enough to compound some load data before doing anything stupid. Anyone had any luck with 190+ bullet weights with a 1:10 16" bbl before? I'm open to jokes, name calling, and useful information. You won't hurt my feelings. Thanks in advance. |
|
Quoted:
10.3 gr of 2400 with 220gr dropped 8" at 100 yds, 16 " barrel, FAL converted to x39 |
|
Quoted:
No experience with a 1:10 twist with those heavy bullets. If I were you, I would work up the loads and take that suppressor off to confirm you're not getting keyholing. Side note: How quiet is the 7.62x39 compared to the 300 blk in an AR platform? |
|
Quoted: Dropped 8" at 100 yards??? In .308, 165gr at 1600fps after 168gr at 2600fps is about 6 MOA. 125gr at 1800fps is about 4 MOA. |
|
Quoted:
No experience with a 1:10 twist with those heavy bullets. If I were you, I would work up the loads and take that suppressor off to confirm you're not getting keyholing. Side note: How quiet is the 7.62x39 compared to the 300 blk in an AR platform? ![]() Single shot suppressed subsonic |
| I've been working up various sub sonic loads for my SBR AK. I've used the Berry's 200 gr. plated .308 and the Amax 208 gr. bullets. My sweet spot last week end was the 200 gr Berry's with 9.5 grains of Accurate 1680. But they only cycle suppressed with my Wolverine on and the KNS piston closed nearly all the way. Gonna load some Trail Boss this week and try them this week end. Hoping to get a load that will cycle iunsuppressed and suppressed. |
Armory Sponsor
