Armory Sponsor
Posted: 8/3/2010 2:45:43 PM EDT
| what is the radius of the receiver top? im looking to make a picatinny rail like on the MCS. |
| I don't understand what you are needing. The rail would have to be contoured to the top of the receiver to fit properly. I am guessing by the lack of response, other don't understand either. If you don't want a manufactured rail built for the 870 then I don't understand what you are trying to do. Good luck with the project. |
|
Quoted:
I don't understand what you are needing. The rail would have to be contoured to the top of the receiver to fit properly. I am guessing by the lack of response, other don't understand either. If you don't want a manufactured rail built for the 870 then I don't understand what you are trying to do. Good luck with the project. i have a drawing that i have done of an actual MCS picatinny rail. I have the drawing sheet of where to drill the receiver for the rail. i need the dimension for the receivers top radius (where the rail would mount). that dimension will allow me to mill the bottom of teh rail to fit the contour of the receiver. i do want a rail and i am going to manufacture it, out of steel and a copy of the MCS one, that is why i need the dimension (unless i can buy a MCS one for cheap) |
Armory Sponsor