User Panel
Posted: 9/10/2024 6:08:04 PM EDT
[Last Edit: vmpglenn]
LC Carbine in 10mm. Shows in stock at GrabAGun for $999
Takes Glock 20 mags. Pretty neat, gonna get one as soon as prices fall a bit. Ruger Web Site |
|
Scepticism is an exercise, not a life; it is a discipline fit to purify the mind of prejudice and render it all the more apt, when the time comes, to believe and to act wisely. -- George Santayana
Never mistake a clear view for a short distance. |
[#1]
That could be kind of fun.
Are there factory Glock extendo mags for 10mm? Or are there add on extensions that are good to go? |
|
|
[#2]
I finally get my wish!!! I held out when the 45 model came out.
The Glock mags are from sgm tactical 30 rounders from what I’ve experienced they’re gtg. The springs will be stiff just load as many and leave the rounds in until the spring compresses and it’ll load just fine afterwards. |
|
|
[#3]
I swore never to get another POS Ruger. Been looking for another10mm rifle dang it. Will have to wait for some accuracy reports.
|
|
|
[#4]
|
|
I sell firearms produced by the finest child labor in the world, be it Filipino, Muslim, Mormon, Arizonan, or Texan.
|
[#5]
Too late Ruger.
I just bought a Grand Power Stribog 10mm. It's roller delayed. Also have that Hi Point but save your money on that one folks. It went back right off the get go with an oversize chamber. Ohh sure they fixed it on their dime. Somewhere around here I have a YEET cannon that hasn't even been shot. It needs to go back as well. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[#6]
Originally Posted By meistermash: Too late Ruger. I just bought a Grand Power Stribog 10mm. It's roller delayed. Also have that Hi Point but save your money on that one folks. It went back right off the get go with an oversize chamber. Ohh sure they fixed it on their dime. Somewhere around here I have a YEET cannon that hasn't even been shot. It needs to go back as well. View Quote That Stribog looks really nice. How much did you pay? Only downside I can see is that it uses expensive HK mags. But if it comes with 3 of them it's not really an issue. |
|
It's never a 'big deal' until you have to pull the trigger.
|
[#7]
Well it wasn't cheap.
Psa had them on sale and it was thirteen and a half. 8" barrel folding brace 3 magazines Also has the piccatiny end cap included if you wanted to change to those types of braces. I haven't shot it yet because I am sickly right now. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[#8]
Originally Posted By meistermash: Too late Ruger. I just bought a Grand Power Stribog 10mm. It's roller delayed. Also have that Hi Point but save your money on that one folks. It went back right off the get go with an oversize chamber. Ohh sure they fixed it on their dime. Somewhere around here I have a YEET cannon that hasn't even been shot. It needs to go back as well. View Quote What's wrong w/ the Yeet Cannon? |
|
I sell firearms produced by the finest child labor in the world, be it Filipino, Muslim, Mormon, Arizonan, or Texan.
|
[#9]
The barrel is all chattered up and the champhering for the chamber mouth is chattered and borked.
Looks like someone ran the chamber hone or polishing doohicky threw the barrel as well. I bought 2 of them just because they said YEET cannon. While I know HP is a budget blaster, they can do better than that. The good one of the 2, I gifted. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[#10]
Originally Posted By meistermash: The barrel is all chattered up and the champhering for the chamber mouth is chattered and borked. Looks like someone ran the chamber hone or polishing doohicky threw the barrel as well. I bought 2 of them just because they said YEET cannon. While I know HP is a budget blaster, they can do better than that. The good one of the 2, I gifted. View Quote See how it shoots. If it has issues running, Mom will fix it. My customer who bought the Yeet Cannon off my table bought it for the exact same reason as you. Sold another one to a customer b/c it was cheaper than a threaded bbl for his .357 SIG P226 and he wouldn't have to buy a booster for his can. I don't think he's shot it yet. |
|
I sell firearms produced by the finest child labor in the world, be it Filipino, Muslim, Mormon, Arizonan, or Texan.
|
[#11]
That's a great BIG FRICKEN NO for the hi point. 10 round mags STILL, WTF.
Got a TNW 10mm for a couple hundred more that runs Glocks mags. Plus the CMMG. Just want an AR style 10mm with 16 inch barrel. Hopefully S&W will get going on one in the Response platform. |
|
|
[#12]
Originally Posted By Chipper44mag: That's a great BIG FRICKEN NO for the hi point. 10 round mags STILL, WTF. Got a TNW 10mm for a couple hundred more that runs Glocks mags. Plus the CMMG. Just want an AR style 10mm with 16 inch barrel. Hopefully S&W will get going on one in the Response platform. View Quote Yeah, you might be able to get the 15 round .40 ProMags to work in the HiPoint. Redball's got 20s, but only in .45 & 9mm. .45s will convert to 1911 mags so you can run straight 15s and drums, and ProMag has a 9mm drum. TNW makes a nice carbine. Rudy could probably do you a nice AR-10mm. @Mad-Machinist |
|
I sell firearms produced by the finest child labor in the world, be it Filipino, Muslim, Mormon, Arizonan, or Texan.
|
[#13]
And, they make an adapter for the 45 version to take 1911 magazines for the high piont.
But for what ever reason, they claim 10mm 1911 magazines won't work with it. Rudy is da poo poo and I will ask him to make me a gas 10mm upper some day. Got a AR 80% large Glock mag lower and a Glock in 10mm so I'd have mags. Apologize for the derailment op. |
|
... .-.. .- ...- .- / ..- -.- .-. .- .. -. .
- .... . / --- -. .-.. -.-- / --. --- --- -.. / --- .-. -.-. / .. ... / .- / -.. . .- -.. / --- .-. -.-. |
[#14]
Originally Posted By meistermash: And, they make an adapter for the 45 version to take 1911 magazines for the high piont. But for what ever reason, they claim 10mm 1911 magazines won't work with it. Rudy is da poo poo and I will ask him to make me a gas 10mm upper some day. Got a AR 80% large Glock mag lower and a Glock in 10mm so I'd have mags. Apologize for the derailment op. View Quote Over on the HiPoint forum a few years back we tested .40 S&W 1911 mags, didn't quite fit. Now that I think about it, it may have been a clearance issue in the magwell that we weren't aware of. |
|
I sell firearms produced by the finest child labor in the world, be it Filipino, Muslim, Mormon, Arizonan, or Texan.
|
[#15]
Local shop has one advertised on website for $829. Doesn't open til Tuesday may have to go for a bike ride.
|
|
|
[#16]
Originally Posted By meistermash: Well it wasn't cheap. Psa had them on sale and it was thirteen and a half. 8" barrel folding brace 3 magazines Also has the piccatiny end cap included if you wanted to change to those types of braces. I haven't shot it yet because I am sickly right now. View Quote Whatever the problem, I hope you get well soon. |
|
It's never a 'big deal' until you have to pull the trigger.
|
Executive Director, Vast Right Wing Conspiracy
NC, USA
|
[#17]
That just jumped to the top of my firearms want list.
|
“People will forgive you for being wrong, but they will never forgive you for being right—especially if events prove you right while proving them wrong.”
- Thomas Sowell |
[Last Edit: amendment]
[#18]
I was hoping they were going to release these in other calibers, no youtube vids yet but would be interesting to see its accuracy.
|
|
|
[#19]
Ruger LC Carbine 10mm Unboxing and First Shots |
|
|
[#20]
Originally Posted By Spooky130: That could be kind of fun. Are there factory Glock extendo mags for 10mm? Or are there add on extensions that are good to go? View Quote SGM Tactical 30rd mag. Glock does not make an extended 10mm mag, but several companies make plus 2 extensions and KRISS makes a 17rd extension that gives you 33rds. |
|
|
[#21]
Fix the title got excited for a PC Carbine in 10mm
|
|
BikerNut:
Normal people like motorcycles. Real people like motorcycles. People who don't like motorcycles are just... weird. |
[#22]
I got one brand new. It's a great carbine, and fit/finish is awesome. For me though, a little small, so I've put it up on the market. Otherwise it's an awesome carbine, just the LOP is difficult for a 6-5 guy w a big wingspan, but I have that issue w alot of guns.
|
|
|
[#23]
Originally Posted By Mal3516: I got one brand new. It's a great carbine, and fit/finish is awesome. For me though, a little small, so I've put it up on the market. Otherwise it's an awesome carbine, just the LOP is difficult for a 6-5 guy w a big wingspan, but I have that issue w alot of guns. View Quote You can't add a spacer to the stock or a longer buffer tube? |
|
I sell firearms produced by the finest child labor in the world, be it Filipino, Muslim, Mormon, Arizonan, or Texan.
|
[#24]
I had an opportunity to buy 1. I tried it out, for an hour:
My biggest gripe it’s just a large pistol with a buttstock, for $949. Like the 5.7 and 45 models, it’s difficult for me to do mag changes. I have to raise it higher than my mp5. I don’t know I’m still on the fence. |
|
|
[#25]
|
|
|
[#26]
Is the stock permanently attached/proprietary or is it just bolted on a picatinny rail on the back of the receiver?
|
|
|
[#27]
|
|
I sell firearms produced by the finest child labor in the world, be it Filipino, Muslim, Mormon, Arizonan, or Texan.
|
Executive Director, Vast Right Wing Conspiracy
NC, USA
|
[#28]
|
“People will forgive you for being wrong, but they will never forgive you for being right—especially if events prove you right while proving them wrong.”
- Thomas Sowell |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.