User Panel
Originally Posted By G3k: Nice! I’ve been thinking about a shortened MI folder for a brace setup too. How’s the feel? It seems like it would balance out the gun well. View Quote I like it. I shot one with the collapsible brace and wasn't a fan of the cheek weld. This one is far more comfortable to shoot, especially with a beard. Locking mechanism is solid as well. I also have the stock buttplate if I decide to sbr, just need to swap it with the tailhook. Kinda neat. |
|
|
I epoxied my grip in 2 steps and installed a screw to join both parts and didn't spare the epoxy. This grip probably won't come off in my lifetime. Feels great.
|
|
|
Kind of want to try out a franklin binary because I like the idea of playing with a 2 round burst. However being that its direct blow-back I'm not sure I'd want to risk an out of battery.
Is there anything the ghm9 does over a standard ar9 to prevent oob detonations? |
|
|
Originally Posted By FoxValleyTacDriver: Kind of want to try out a franklin binary because I like the idea of playing with a 2 round burst. However being that its direct blow-back I'm not sure I'd want to risk an out of battery. Is there anything the ghm9 does over a standard ar9 to prevent oob detonations? View Quote Between the length of the bolt carrier relative to tail of the firing pin and the firing pin spring, it would be near impossible for the trigger/falling hammer to cause an OOB. Modern trigger packs also incorporate a disconnector to retain the hammer. I'd recommend contacting B&T if you are interested in their official answer. |
|
|
"The world is full of shipping clerks who have read the Harvard Classics."
Charles Bukowski |
In response to the idea that the military wouldn't use something bad therefore b&t mags must be good: Lol bullsh*t. The military would use all kinds of terrible crap. I had one B&T mag explode from sitting loaded and they will break if you drop them loaded. They're absolutely terrible.
|
|
|
Couple changes. Almost done with it. Surefire pro will be here tomorrow.
Attached File Edit: surefire is mounted Attached File Attached File |
|
|
Would love to find a GHM in .40
|
|
|
A new piece of fun. I swapped my folding charging handle to right side after using it on the left side the entire time I've owned it and the handle jams at the part where the ejection port meets the handle cut out. I can see it stripping metal from the receiver. Beautiful. Truly an elegant piece of Swiss engineering.
|
|
|
Originally Posted By TheDonaldCossack: A new piece of fun. I swapped my folding charging handle to right side after using it on the left side the entire time I've owned it and the handle jams at the part where the ejection port meets the handle cut out. I can see it stripping metal from the receiver. Beautiful. Truly an elegant piece of Swiss engineering. View Quote On B&T Parts website advertising the folding charging handle it says -Only to be used on the left side of the firearm |
|
|
Heads up: if you bought the SIG lower GHM Bereli is now selling 30rd 320 mags for $50 with free shipping. I believe if you're outside of Florida they don't charge sales tax.
|
|
|
Originally Posted By Boats75: On B&T Parts website advertising the folding charging handle it says -Only to be used on the left side of the firearm View Quote Wow so I have to look at a non b&t affiliated website to know that this handle can only be used on the left side? I see midwestgunworks.com also mentions it. The website I bought it from didn't say that (Tarheel three or four years ago) and B&T didn't say that. It doesn't say that in the owners manual or with the part when I bought it. Amazing stuff. |
|
|
Originally Posted By TheDonaldCossack: Wow so I have to look at a non b&t affiliated website to know that this handle can only be used on the left side? I see midwestgunworks.com also mentions it. The website I bought it from didn't say that (Tarheel three or four years ago) and B&T didn't say that. It doesn't say that in the owners manual or with the part when I bought it. Amazing stuff. View Quote All three of your posts on AR15 have been here shit talking the GHM9. So either sell it or put the CH on the right (correct) side but either way fuck off out of this thread if you don’t have anything constructive to contribute |
|
|
How do you like the high Unity scope mount. Thinking about putting a Holosun 403B on mine with a lower 1/3 or taller mount. How hard was it to zero and what is your hold for the height over bore?
Thanks. |
|
|
Originally Posted By TheDonaldCossack: Wow so I have to look at a non b&t affiliated website to know that this handle can only be used on the left side? I see midwestgunworks.com also mentions it. The website I bought it from didn't say that (Tarheel three or four years ago) and B&T didn't say that. It doesn't say that in the owners manual or with the part when I bought it. Amazing stuff. View Quote Not sure why you are calling it a non B&T affiliated website. When you click on "Store" from the B&T USA website it takes you to the B&T Parts site I linked. Maybe I'm just wired differently but before I add, remove or change parts on a gun I do a little research first to make sure it won't cause any issues. Looks more to me like you decided to change something and caused an issue now you're blaming the manufacturer for your mistake.... someone else said it already but, if you are that unhappy with the gun maybe you'd be better off selling it. |
|
|
Originally Posted By Mygrainman: I got my AFG from Custom Smith Manufacturing, and it makes all the difference in the world.(and they sent (3) stickers..A+ CSM!) Way more natural feel and much better control. I love how it continues the lines along the take down pins... Kinda ties my optic in to the whole motif too Now Trigger. I’ve heard the Geissele that was made for these is not great, and I kinda want Single stage. What AR triggers work, and what’s the difference? https://i.postimg.cc/fLDSKrWF/9-CA44-A2-A-F4-D9-4-B8-F-ABC6-79-BDA63699-D8.jpg https://i.postimg.cc/LX22wd1t/C3881410-AAA4-42-A0-9603-82963-E72-AB2-E.jpg https://i.postimg.cc/zvf5Dnp3/CD82349-E-C04-B-433-F-B225-1498-CA4-EB932.jpg View Quote What muzzle device is that, looks good. |
|
|
Originally Posted By FoxValleyTacDriver: Couple changes. Almost done with it. Surefire pro will be here tomorrow. https://www.ar15.com/media/mediaFiles/285899/GHM__greatness_jpg-2495323.JPG Edit: surefire is mounted https://www.ar15.com/media/mediaFiles/285899/20220820_134425_jpg-2496496.JPG View Quote How do you like the Sig XDR ? |
|
|
delete
|
|
|
|
Originally Posted By Boats75: Not sure why you are calling it a non B&T affiliated website. When you click on "Store" from the B&T USA website it takes you to the B&T Parts site I linked. Maybe I'm just wired differently but before I add, remove or change parts on a gun I do a little research first to make sure it won't cause any issues. Looks more to me like you decided to change something and caused an issue now you're blaming the manufacturer for your mistake.... someone else said it already but, if you are that unhappy with the gun maybe you'd be better off selling it. View Quote I disagree with this. If a firearm needs a manual to ensure it's put together correctly than it is a poor design. Especially when the stock charging handle is reversible. Most people will assume the folder is reversible as well. I did before he posted. |
|
|
Originally Posted By MDN: How do you like the Sig XDR ? View Quote Haven't used it much but I like it alot so far. As bright as any aimpoint I've used, and thats not an exageration. I was genuinely impressed. Multiple reticles is neat for a range toy. I use the empty triangle and then when I turn my laser on it acts as the dot. No practical usage for that, its just fun. Only downsides so far is it doesn't use t2 mounts like the other romeo models since it uses a triple A. Attached File Attached File Attached File |
|
|
Originally Posted By FoxValleyTacDriver: I disagree with this. If a firearm needs a manual to ensure it's put together correctly than it is a poor design. Especially when the stock charging handle is reversible. Most people will assume the folder is reversible as well. I did before he posted. View Quote Feel free to disagree. I don't see where I mentioned a manual to ensure it's put together correctly. Key word is "stock" charging handle. Like I said, before I drop money to buy either an OEM or aftermarket component, part, accessory, etc I research to make sure it will meet my intended use/needs while not interfering with existing components or cause other issues. It doesn't matter if you're talking about stuff for a gun, truck or electronics, everything gets looked into. You do you, |
|
|
Looking for a picatinny angled foregrip with hand stop for my GHM9-G. Anyone have anything that works well? The magpul one is a bit long.
|
|
|
|
|
BCM makes a small angled foregrip that only has one flat surface and that mounts to the picatinny rail on the bottom. Everything else is angled to keep it legal. I like it nice mount and very light.
|
|
|
Does anyone have the box their ghm9 came in. We moved and I can't find it anywhere in the house or car.
If you do I would like an im to talk. |
|
|
deleted, sorry
|
|
|
|
Originally Posted By brad-b-2000: New guy...the Kriss foregrip is perfect! going to add it for use after the Form 1 comes thru.....just tried it on to see how it fit.... https://i.imgur.com/YRWPdZ4.jpg View Quote Is that a BCM Mod 3 grip? If so did you have to modify it to fit? |
|
|
Originally Posted By Jeepsnguns81: Is that a BCM Mod 3 grip? If so did you have to modify it to fit? View Quote Good eye! yes it is...it was a tight fit, but it eventually slid right on without modification,(but some slight tapping)...i used the lock washer that came with the Mod 3, and the OEM grip bolt....DO NOT OVERTIGHTEN IT! you can break the lower receiver where the nut for the bolt goes..... |
|
|
Originally Posted By brad-b-2000: Good eye! yes it is...it was a tight fit, but it eventually slid right on without modification,(but some slight tapping)...i used the lock washer that came with the Mod 3, and the OEM grip bolt....DO NOT OVERTIGHTEN IT! you can break the lower receiver where the nut for the bolt goes..... View Quote Thanks for the response. I tried to put one on my B&T mag lower and it didn't seem to fit. I might try again on my Glock lower. |
|
|
|
Originally Posted By brad-b-2000: New guy...the Kriss foregrip is perfect! going to add it for use after the Form 1 comes thru.....just tried it on to see how it fit.... https://i.imgur.com/YRWPdZ4.jpg View Quote Good job violating the law by just throwing it on and fitting...while slapping a pic of it on the internet for all to see... that's a AOW now...common sense is out the window I see... |
|
|
Picked up a GHM9 “enhanced” yesterday and submitted the eform 1 today.
|
|
|
Originally Posted By thehun06: Good job violating the law by just throwing it on and fitting...while slapping a pic of it on the internet for all to see... that's a AOW now...common sense is out the window I see... View Quote Well it depends. ATF is claiming braced firearms are and have always been SBRs. Which means this is an SBR and not an AOW. Sorry for the hijack. |
|
|
Originally Posted By thehun06: Good job violating the law by just throwing it on and fitting...while slapping a pic of it on the internet for all to see... that's a AOW now...common sense is out the window I see... View Quote View All Quotes View All Quotes Originally Posted By thehun06: Originally Posted By brad-b-2000: New guy...the Kriss foregrip is perfect! going to add it for use after the Form 1 comes thru.....just tried it on to see how it fit.... https://i.imgur.com/YRWPdZ4.jpg Good job violating the law by just throwing it on and fitting...while slapping a pic of it on the internet for all to see... that's a AOW now...common sense is out the window I see... How about you IM the guy if you’re so concerned instead of playing inflated sense of ego hall monitor. |
|
|
|
|
|
|
Must wish he was ATF or something
|
|
|
Is there any plans or way to use these with HK 9mm P30/VP9 mags? There was a TFB interview a few years ago where they illuded to this. Did anything ever come of it?
|
|
|
Originally Posted By brad-b-2000: New guy...the Kriss foregrip is perfect! going to add it for use after the Form 1 comes thru.....just tried it on to see how it fit.... https://i.imgur.com/YRWPdZ4.jpg View Quote Where did you get the magwell extension for the GMH9? |
|
The more "news" we get, the less we know.
|
Originally Posted By Glenzo: Where did you get the magwell extension for the GMH9? View Quote Looks like a CSM. |
|
|
The more "news" we get, the less we know.
|
Ones up for sale locally for a (real) good price (Compact-glock mag version).
While I don't need one, this one caught my eye. Convince me why I need to pull the trigger on this. |
|
|
Does your dewg bite...?
|
What's the prevailing wisdom on stocks these days? The telescoping ones don't really do it for me. Are the A3/Sig/CSM options good? I assume the B&T one is fine.
|
|
|
Whatever you do with the overpriced Swiss mqouse.
Don't send it to Florida office for work when it has out of battery detonation because they will determine that it's unfirable and keep your property with no reimbursement or your property back. They will offer you an overpriced special deal. They want you to spend more money on their inferior products. I have been through this and just want to help others to know what kind of company and products you may Choose to spend your hard earned money with. They have had my pistol with my name and information on a 4473. If I had known they would confiscate my property I would have never sent it to Florida. I could have scrapped it myself and sold some parts to recoup some of my money. Now I have lost a lot of money. |
|
|
Originally Posted By 64tinc: Whatever you do with the overpriced Swiss mqouse. Don't send it to Florida office for work when it has out of battery detonation because they will determine that it's unfirable and keep your property with no reimbursement or your property back. They will offer you an overpriced special deal. They want you to spend more money on their inferior products. I have been through this and just want to help others to know what kind of company and products you may Choose to spend your hard earned money with. They have had my pistol with my name and information on a 4473. If I had known they would confiscate my property I would have never sent it to Florida. I could have scrapped it myself and sold some parts to recoup some of my money. Now I have lost a lot of money. View Quote yeah, they cant do that. keeping it constitutes theft |
|
|
Originally Posted By 64tinc: Whatever you do with the overpriced Swiss mqouse. Don't send it to Florida office for work when it has out of battery detonation because they will determine that it's unfirable and keep your property with no reimbursement or your property back. They will offer you an overpriced special deal. They want you to spend more money on their inferior products. I have been through this and just want to help others to know what kind of company and products you may Choose to spend your hard earned money with. They have had my pistol with my name and information on a 4473. If I had known they would confiscate my property I would have never sent it to Florida. I could have scrapped it myself and sold some parts to recoup some of my money. Now I have lost a lot of money. View Quote They had my TP9 after a OOB incident for about 9 months. But I got it back. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.