User Panel
User Panel
User Panel
OH, USA
|
Posted: 5/8/2023 4:23:50 PM EST
[#1]
I'm looking at the B&T GHM9 Sport (16 inch barrel).
Does B&T make a fixed stock that I can throw on? Or what are my options? On the B&T website all I see is a telescoping stock that costs $499. |
|
|
|
Posted: 5/8/2023 4:34:16 PM EST
[#2]
|
|
|
|
OK, USA
|
Posted: 7/8/2023 11:18:47 AM EST
[#3]
Update to give B&T owners joy for the company. Last year I sent my Ghm9 to company from out of battery kaboom. Got an email last week of June saying repair was finished and going to FedEx it to me after parts replaced. Received Ghm9 from FedEx delivery yesterday.
Pistol looks brand new with parts replaced. They originally wanted me to buy a new one from them, but after months of waiting they decided to replace and return my pistol. Thanks to B&T for doing the right thing. I sold the red dot I had on it now looking for a new system. sy |
|
|
|
Posted: 8/20/2023 3:38:06 PM EST
[#4]
Need to enlist the advice of fellow GHM9 owners. I had a collapsing tail hook. I got my approved form 1 back ($200) version and I have the B&T stock kit, BT-20546. I tried to use a T10 to remove the long piece that attaches to the muzzle end of the rail but was unable to budge the screws. I had the same result with the four screws that hold the brace on the butt end of the rails. Are they secured with thread locker? Any ideas? How do I get thos screws loose and removed? Any help would be appreciated.
|
|
|
|
USA
|
Posted: 8/21/2023 12:13:29 PM EST
[#5]
Quote HistoryOriginally Posted By mragu: Need to enlist the advice of fellow GHM9 owners. I had a collapsing tail hook. I got my approved form 1 back ($200) version and I have the B&T stock kit, BT-20546. I tried to use a T10 to remove the long piece that attaches to the muzzle end of the rail but was unable to budge the screws. I had the same result with the four screws that hold the brace on the butt end of the rails. Are they secured with thread locker? Any ideas? How do I get thos screws loose and removed? Any help would be appreciated. I ordered a telescopic brace APC9K setup and have been reading related threads trying to get the right parts sourced for the stock conversion. I recall one person outright saying Rocksett was used, which IMO seems unlikely but keep that in mind if you try heat and it still doesn't break. Since I think you can just take the whole back end off with the rails attached, shouldn't be too hard to figure out a way to get those screws either heated for regular threadlock or under water in the event they used rocksett. |
|
|
|
Posted: 8/27/2023 2:26:46 PM EST
[#6]
Has anyone backordered the collapsible stock from B&T, if you did how long did it take before you got it?
|
|
|
|
TX, USA
|
Posted: 10/9/2023 10:45:29 AM EST
[Last Edit: Wormydog1987]
[#7]
Finally got my form 1 approved and I think I’ve finalized the GHM9 SBR night vision setup. I haven’t even fired it yet, kinda nervous from all of the problems and blown extractors I’ve seen in this thread.
|
|
|
OH, USA
|
Posted: 10/22/2023 8:48:28 PM EST
[#8]
Quote HistoryOriginally Posted By Wormydog1987: Finally got my form 1 approved and I think I’ve finalized the GHM9 SBR night vision setup. I haven’t even fired it yet, kinda nervous from all of the problems and blown extractors I’ve seen in this thread. https://i.imgur.io/GVcORfg_d.webp?maxwidth=640&shape=thumb&fidelity=medium Diggin that chest rig, which one is that? |
|
|
TX, USA
|
Posted: 11/1/2023 10:34:32 AM EST
[#9]
 Traded in my standard GHM9 for the SD version. Now I'm waiting on both Form 1 and 4. Can't wait to shoot this thing. |
|
|
OH, USA
|
Posted: 11/2/2023 3:32:12 PM EST
[#10]
|
|
|
|
Posted: 11/2/2023 4:20:08 PM EST
[#11]
Quote HistoryOriginally Posted By whiplash10: https://live.staticflickr.com/65535/53305745768_1682e5cfe0_h.jpg I like that sling, who makes it? |
|
|
|
OH, USA
|
Posted: 11/2/2023 7:47:36 PM EST
[#12]
Eastern Shore Sling Company
|
|
|
|
Posted: 11/2/2023 8:51:09 PM EST
[#13]
Quote HistoryOriginally Posted By whiplash10: Eastern Shore Sling Company Ty kindly. |
|
|
|
|
Posted: 11/27/2023 6:59:55 AM EST
[#14]
A3 Tactical 20% off until Nov 30th
Great foregrips, stocks and other stuff for B&Ts, Scorpions, etc. along with other stuff https://a3tactical.com/black-friday-cyber-monday/ |
|
|
|
|
Posted: 12/16/2023 9:13:11 AM EST
[#15]
Lets see the guts of your guns. Here is the tooling on the brand new one I took possession of a few days ago:
 Attached File |
|
|
|
|
Posted: 12/16/2023 9:13:38 AM EST
[#16]
|
|
|
|
|
Posted: 12/24/2023 4:52:28 PM EST
[Last Edit: stimr2]
[#17]
My GHM9's bolt also has tooling marks. However, my APC9 Pro and SPC9 don't. Guessing B&T had to cut corners to keep the price of the GHM9 lower.
|
|
|
|
|
Posted: 12/24/2023 10:12:27 PM EST
[#18]
I’m going to concede that point.
It shoots great and looks good on the outside for marketing and reputation. Id have made the same decision I think. |
|
|
|
TX, USA
|
Posted: 2/7/2024 10:57:06 AM EST
[Last Edit: Wormydog1987]
[#19]
Mine shows tooling marks but not that bad by far.
I have maybe 500 rounds through mine and it has hung up on some 124gr HST. Want to find a defensive round it likes 100%. Anybody have any recommendations? ETA mine is gen 2 |
|
|
VA, USA
|
Posted: 2/17/2024 12:37:45 PM EST
[#20]
So I brought home my new GHM yesterday, and I'm a little....confused? I bought it through a big box retailer who appeared to have a great deal on the Gen 2 standard model. I plopped down the cash, bought several more KCI B&T mags in preparation. Yesterday I go pick it up and it's all there in a nice little nylon sling bag. One 30 round B&T magazine included.
But as I'm looking at it, I notice that the mag well is slanted. It's not marked as a Glock model, so my only guess here is that it's a P320 model (which, coincidentally, I've seen similar sales on). The included tag and model number all indicate that it should be a standard model, though. So now I'm torn on the next step. I've got inquiries into the retailer as well as B&T about what might have happened- but the chances are that I've now got a P320 model even though I have no P320 magazines. Given what I paid for it, I could grab another lower and still come out about where I would have been at MSRP. Of course, nobody has the standard lowers available, anyway. I'm also strongly considering just getting the Lingle lower to run Scorpion mags. In the end, it still feels nice and I'm sure it will run well. It just wasn't what I was expecting.  Now, new question...outfitting for home defense. My plan was an Arisaka 300 series. First impulse is a side MLOK mount, but given the boxier shape of the handguard I'm not sure it woudl fit. Anyone have experience there? |
|
|
|
Posted: 2/17/2024 9:37:41 PM EST
[#21]
My ghm9 didnt have a 3 lug or sling case, so not only did you get the wrong mag setup you also got upgraded!
|
|
|
|
|
Posted: 2/17/2024 9:59:39 PM EST
[#22]
Quote HistoryOriginally Posted By ChickenDaddy: My ghm9 didnt have a 3 lug or sling case, so not only did you get the wrong mag setup you also got upgraded! That case is better than the hard shell one i got that sits on a shelf. Score there. |
|
|
|
UGA
|
Posted: 2/17/2024 10:02:24 PM EST
[#23]
Quote HistoryOriginally Posted By ChickenDaddy: My ghm9 didnt have a 3 lug or sling case, so not only did you get the wrong mag setup you also got upgraded! Standard or compact? |
|
|
VA, USA
|
Posted: 2/19/2024 2:04:46 PM EST
[#24]
Weird follow up...
Figuring that this just had to be a Sig lower since there aren't any other markings, I grabbed a 21 round 320 magazine from the shop today. Doesn't lock in. So it must be a Glock model, right? It's odd that there are no markings whatsoever to indicate that. I've got a CS request in with B&T as well with the serial number info and pictures of the tags to see if they have insight. |
|
|
VA, USA
|
Posted: 2/26/2024 3:15:08 PM EST
[#25]
After getting everything sorted out (it was indeed Glock mags), I've been getting things set up//mocked up the way I like. I'm really digging this thing.
|
|
|
|
Posted: 2/27/2024 2:52:45 AM EST
[#26]
Quote HistoryOriginally Posted By DisposableHero: After getting everything sorted out (it was indeed Glock mags), I've been getting things set up//mocked up the way I like. I'm really digging this thing. https://everydaymarksman.files.wordpress.com/2024/02/ghm-side-4.jpeg It gets better with a brace or stock. Still waiting on my form 1 but in the meantime I have the brace on it. I think I may just leave the brace on it. The stock price is tiny in comparison.  Attached File Attached File Attached File |
|
|
|
AZ, USA
|
Posted: 2/27/2024 8:18:12 AM EST
[#27]
Quote HistoryOriginally Posted By MK318: It gets better with a brace or stock. Still waiting on my form 1 but in the meantime I have the brace on it. I think I may just leave the brace on it. The stock price is tiny in comparison. https://www.ar15.com/media/mediaFiles/557335/IMG_7469_jpeg-3142734.JPGhttps://www.ar15.com/media/mediaFiles/557335/IMG_7470_jpeg-3142735.JPG https://www.ar15.com/media/mediaFiles/557335/IMG_7255_jpeg-3142736.JPG What charging handle is that? |
|
|
|
Posted: 2/27/2024 1:08:02 PM EST
[#28]
It is a standard B&T folding charging handle with Neoteric Design extended lever. So you have to buy the B&T folding charging handle and the extended latch. It is $189 total. Pricy, but it gives you way more leverage. Makes locking the bolt back to the rear a breeze. I had shoulder surgery last year and my left arm strength isn’t quite back there yet so I needed the extra leverage. It also made it easier for the wife to work the bolt.
https://bt-parts.com/bt-450076-foldable-charging-handle/ https://neotericdesigns.net/shop/ols/products/b-and-t-pro-extended-charging-handle-for-223-slash-300-slash-308/v/BT-PRO-XCH1 |
|
|
|
AZ, USA
|
Posted: 2/27/2024 2:53:59 PM EST
[#29]
Quote HistoryOriginally Posted By MK318: It is a standard B&T folding charging handle with Neoteric Design extended lever. So you have to buy the B&T folding charging handle and the extended latch. It is $189 total. Pricy, but it gives you way more leverage. Makes locking the bolt back to the rear a breeze. I had shoulder surgery last year and my left arm strength isn’t quite back there yet so I needed the extra leverage. It also made it easier for the wife to work the bolt. https://bt-parts.com/bt-450076-foldable-charging-handle/ https://neotericdesigns.net/shop/ols/products/b-and-t-pro-extended-charging-handle-for-223-slash-300-slash-308/v/BT-PRO-XCH1 Thanks for the response and info. I was hoping it was an aftermarket CH as the b&t folder doesn't work in my GHM9. The receiver on mine is out of spec and the folding CH binds up. I tried an aftermarket fixed CH and it works fine. |
|
|
|
Posted: 2/28/2024 12:43:34 AM EST
[Last Edit: MK318]
[#30]
Quote HistoryOriginally Posted By Jeepsnguns81: Thanks for the response and info. I was hoping it was an aftermarket CH as the b&t folder doesn't work in my GHM9. The receiver on mine is out of spec and the folding CH binds up. I tried an aftermarket fixed CH and it works fine. Quote HistoryOriginally Posted By Jeepsnguns81: Originally Posted By MK318: It is a standard B&T folding charging handle with Neoteric Design extended lever. So you have to buy the B&T folding charging handle and the extended latch. It is $189 total. Pricy, but it gives you way more leverage. Makes locking the bolt back to the rear a breeze. I had shoulder surgery last year and my left arm strength isn’t quite back there yet so I needed the extra leverage. It also made it easier for the wife to work the bolt. https://bt-parts.com/bt-450076-foldable-charging-handle/ https://neotericdesigns.net/shop/ols/products/b-and-t-pro-extended-charging-handle-for-223-slash-300-slash-308/v/BT-PRO-XCH1 Thanks for the response and info. I was hoping it was an aftermarket CH as the b&t folder doesn't work in my GHM9. The receiver on mine is out of spec and the folding CH binds up. I tried an aftermarket fixed CH and it works fine. That sucks. I’ve heard people having that problem with the folding CH. The extended latch may add enough clearance for you because the way it is designed it isn't as close to the receiver as the stock latch but at $200 (when you factor in shipping), it is a lot to pay to find out. I was lucky I guess in that mine didn’t have that spec issue. The folding CH is nice in that it is folded and out of the way. I tried to keep that side of the gun a low profile as possible. I was concerned that the extended latch and the bolt moving would create an issue with my left hand placement but it hasn’t. |
|
|
|
IN, USA
|
Posted: 3/1/2024 5:37:27 PM EST
[#31]
I placed an order for the GHM9 SD upper back in December last year. Has anyone heard anything about when they can be expected to arrive stateside? I suppose it's possible that B&T hasn't even manufactured the next batch yet.
|
|
|
USA
|
Posted: 3/3/2024 8:56:37 PM EST
[#32]
Quote HistoryOriginally Posted By MK318: It gets better with a brace or stock. Still waiting on my form 1 but in the meantime I have the brace on it. I think I may just leave the brace on it. The stock price is tiny in comparison. https://www.ar15.com/media/mediaFiles/557335/IMG_7469_jpeg-3142734.JPGhttps://www.ar15.com/media/mediaFiles/557335/IMG_7470_jpeg-3142735.JPG https://www.ar15.com/media/mediaFiles/557335/IMG_7255_jpeg-3142736.JPG I agree. I much prefer the tailhook over the stock end. The stock end is way too small. |
|
|
|
Posted: 3/3/2024 9:20:18 PM EST
[#33]
Quote HistoryOriginally Posted By Jeepsnguns81: Standard or compact? Pretty sure its the compact |
|
|
|
GA, USA
|
Posted: 3/22/2024 2:18:48 PM EST
[#34]
Traded a Sig 556 for a virgin GHM9
 10 minutes later  Now to go shopping |
|
|
AZ, USA
|
Posted: 3/22/2024 3:05:41 PM EST
[#35]
Quote HistoryOriginally Posted By ChickenDaddy: Pretty sure its the compact AFAIK, none of the compacts come with the 3 lug but the standards do. |
|
|
FL, USA
|
Posted: 3/24/2024 3:05:32 PM EST
[#36]
Quote HistoryOriginally Posted By AlphaThree: They had my TP9 after a OOB incident for about 9 months. But I got it back. Did you watch the Youtuber video about his alleged OOB incident? B&T said it's impossible to fire OOB and the video shows why. Interesting take from B&T including their reasoning for the issues, not overcharged round but undercharged!! Yes it's designed and tested for high pressure rounds, interesting none the less but it obviously is happening. I had my first outing today with my GHM9 enhanced and was pleasantly surprised how well it functioned with ETS mags, factory no so much. With 158gr. subs it was movie quiet on an old Gemtech Tundra which was amazing to me. |
|
|
AZ, USA
|
Posted: 4/13/2024 10:44:05 PM EST
[#37]
For guys who have installed MDs, what did you use to hold the barrel while torquing on the MD? I want to put a 3 lug adapter on my C, so I can run the B&T can.
|
|
|
USA
|
Posted: 4/14/2024 7:21:45 PM EST
[#38]
So, I currently own two GHM9 compacts - both stamped (one has the telescoping stock and the other has the folder). I love the platform. I also have two APCs, a first gen and a K model, both SBR’d. Again, love the platform but actually kind of prefer the GHM9.
So, I was offered a great deal on the GHM9-SD factory SBR with the telescoping stock. I jumped on it immediately. Anyone have any experiences they want to share? I really didn’t need any more subguns (I have so many I really have lost county, but love them all). Love to hear any experiences with the SD. |
|
|
OK, USA
|
Posted: 4/14/2024 8:59:44 PM EST
[#39]
I have a GHM9 standard looking for a side folder. Brace. I have a Tailhook 1. Looking for a sling rear attachment.
Which sight system do you prefer? Thanks. Put a POF. Trigger in it no problem much better. |
|
|
VA, USA
|
Posted: 4/17/2024 8:15:33 PM EST
[Last Edit: DisposableHero]
[#40]
Project update. Now in two flavors.
Got the upper how I like it with the Arisaka 300, Unity Axon SL switch, and the EOTech on a riser I had laying around. Put a Magpul K2-XL on the lower. It's...fine.  Then I got a hair up my butt and got a Lingle lower for scorpion mags. Finished it with a B5 P23 grip, Triggertech Duty PCC trigger, and Triggertech safety. Digging it so far. 
|
|
|
USA
|
Posted: 4/27/2024 10:17:25 AM EST
[#41]
Quote HistoryOriginally Posted By Jeepsnguns81: For guys who have installed MDs, what did you use to hold the barrel while torquing on the MD? I want to put a 3 lug adapter on my C, so I can run the B&T can. I do not remember where I saw this but a B&T rep on a forum said that is not a concern because the barrel to barrel extension torque is far greater than the torque you are applying to the muzzle device. |
|
|
|
Posted: 8/15/2024 7:56:16 AM EST
[#42]
Wondering if it would be possible to install a Hoffman Super Safety FRT on my GHM9.
|
|
|
|
FL, USA
|
Posted: 8/22/2024 5:45:17 AM EST
[#43]
Curious if anyone knows if a standard ambi AR15 safety is compatible on a factory BT lower?? Mine is running an Elftman trigger.
|
|
|
|
Posted: 8/26/2024 9:33:03 AM EST
[Last Edit: SnprPSG1]
[#44]
Quote HistoryOriginally Posted By EODcrawler: Here’s mine https://i.imgur.com/WyuFFlE.jpg https://i.imgur.com/B5XXLro.jpg Probably going to switch the optic mount to a Unity FAST, and put the laser on HRF’s new SKIFF mount. That is good looking!!! What brace and attachment is that? Do they make it to fit the GHM45? |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
