Armory Sponsor
Posted: 8/9/2015 9:49:55 PM EDT
So before I knew better I bought a CA94 and it ran like a top out of the box. Now have broke a roller retaining plate and the HK replacement doesn't exact fit. Please advise as to un-fuck me....
|
|
Quoted: I had the same issue. Buy an RCM bolt and never look back. |
|
Yup, that is what ya want. If you have the funds, buy a complete RCM BCG from HKParts...... I bought the RCM BCG just to play it safe, has ran like a spider monkey after drinking 10 gallons of mountain dew for years and thousands of rounds now.............
Buy with Confidence from HKParts 
|
|
Ya, if that works, it is a much cheaper fix OP, having an extra bolt head laying around is a great idea anyhow. I have a Special Weapons SW89 and a Cohaire CA94, the SW has the bolt head that Todd put into it. Runs fine. When that bolt head breaks, I'll buy an RCM. |
|
Quoted: Ya, if that works, it is a much cheaper fix OP, having an extra bolt head laying around is a great idea anyhow. I have a Special Weapons SW89 and a Cohaire CA94, the SW has the bolt head that Todd put into it. Runs fine. When that bolt head breaks, I'll buy an RCM. Quoted: Ya, if that works, it is a much cheaper fix OP, having an extra bolt head laying around is a great idea anyhow. I have a Special Weapons SW89 and a Cohaire CA94, the SW has the bolt head that Todd put into it. Runs fine. When that bolt head breaks, I'll buy an RCM. 
|
|
I finally found the thread I heard this in.
From HKpro It looks like either the "F" style($15) or the spring style will work. HKparts shows two different springs so if you go that route I would call HKparts and ask. But then again the F-style text says it fits only the bolts with the narrower slot and yours appears to be the standard width so maybe the spring is the only option. |
|
Why don't you just buy a few of the coharie parts...
http://black-market-parts.3dcartstores.com/Roller-Holder-BMP5-96_p_88.html |
Armory Sponsor