Armory Sponsor
Posted: 3/13/2014 11:40:30 AM EDT
| I need the p/n's and supplier info for the plate bearing and shims, for the shell plate. Thanks. |
|
McMaster-Carr part numbers:
# 5909K31 Steel Needle-Roller Thrust Bearing, Cage Assembly for 1/2" Shaft Diameter, 15/16" OD # 5909K44 .032 thick washer for 1/2" shaft diameter, steel needle-roller thrust bearing One of each should cost you under $5. Loosen the shellplate bolt set screw, remove the shellplate bolt and cartridge ejector, place the thrust bearing on top of the shellplate, then place the washer on top of the thrust bearing, then place the cartridge ejector on top of the washer, then insert the shellplate bolt through all three and screw it back into place - bottom it out then loosen just enough to allow the shellplate to rotate freely. Lastly, secure the shellplate bolt by tightening the set screw. Enjoy. 
|
Armory Sponsor