[ARCHIVED THREAD] - Examples of gunkote

Posted: 3/27/2009 6:01:54 PM EDT

I am looking at doing some gunkote and I was wondering if I could get some pics posted of various color gunkote. And if the rattle can stuff from brownells works good or if I should go with the solution out of an airbrush. Tips, pointers, recommendations are muuuuuch appreciated. I have everything blasted with 120 aluminum oxide and I just need a push in the color direction. Thanks.

Posted: 3/28/2009 6:06:02 PM EDT

[#1]

That's Brownell's Matte Black Gun Kote out of the rattle can.

VERY easy to apply, just be sure you degrease thoroughly. Apply very thin coats - thinner than you'd apply if it was Krylon. Make sure you have an oven big enough to bake the parts.

Posted: 3/28/2009 6:17:45 PM EDT

[#2]

My Matte Gray retro thread....

http://www.ar15.com/forums/topic.html?b=3&f=123&t=430950

Posted: 3/28/2009 6:38:08 PM EDT

[#3]

Here is my 2" .38 S&W in OD Green.

For some reason, the Tyler grip adapter did not provide a good texture. The Gunkote is holding, but it doesn't look quite right.

I am a beginner, so hopefully I will improve as time goes by.

Posted: 3/28/2009 7:14:07 PM EDT

[#4]

On the Browning HP....O.D. green Gunkote over manganese phosphate parkerizing.

[ARCHIVED THREAD] - Examples of gunkote

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - Examples of gunkote

[ARCHIVED THREAD] - Examples of gunkote