[ARCHIVED THREAD] - FTE problem - see pic

Posted: 4/22/2005 12:26:57 AM EDT

I had my HK94 at the range this weekend and had a couple of failures to extract. Noticed while cleaning my bolt that the extractor spring would slide out with almost no effort. A picture of the severly deformed shell casings are posted at Shell Casing Anything other than the extractor spring that I should replace?

William

Posted: 4/22/2005 5:46:06 AM EDT

[#1]

I would say that unless your extractor is visually damaged, simply replacing the spring should remedy the problem.

Posted: 4/25/2005 4:23:09 AM EDT

[#2]

Yes, just replace the spring.

Some people use the extractor spring from the 93 (not copper colored) because it is much stronger.

[ARCHIVED THREAD] - FTE problem - see pic

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - FTE problem - see pic

[ARCHIVED THREAD] - FTE problem - see pic