Armory Sponsor
Posted: 7/29/2026 5:00:10 PM EDT
|
On form 1, description of how and with what you are going to make a suppressor, the box only allows approximately one and a half lines of text. I have 10 sbr form ones in hand and worked with the room I had on them. I can increase the size of the box for more text but, the text will not add. Now filing for 3D printed suppressor and cannot get what I feel is an adequate description in the box. Is this an ATF problem or a computer setting? Thanks for the help. |
|
Originally Posted By studgrizzly: On form 1, description of how and with what you are going to make a suppressor, the box only allows approximately one and a half lines of text. I have 10 sbr form ones in hand and worked with the room I had on them. I can increase the size of the box for more text but, the text will not add. Now filing for 3D printed suppressor and cannot get what I feel is an adequate description in the box. Is this an ATF problem or a computer setting? Thanks for the help.  This is what I put in my approved form 1s, just over 100 now. You might be over thinking it. That's all I had to put. Then in the document section I attached a screenshot of raw bar stock from onlinemetals.com and a screenshot of a roll of filament from amazon. That's it. I can complete and submit a suppressor form 1 in under 90 seconds if the ATF site doesn't slow me down. 
|
Armory Sponsor