Armory Sponsor
Posted: 3/30/2014 11:10:43 AM EDT
|
Hey guys,
I need to choose a scope mount for my M1A SOCOM II. I'm assuming I need one that attaches at the left side of the receiver and at the ammo charging receptacle. Everything I've searched for on line doesn't give specifics about how it mounts and I want to get this right the first time. I emailed Springfield, but no reply yet. This platform is not one that I am well familiar with. Thanks, Saint Peter |
| I've tried pretty much every conventional scope rail/mount for the M1A. I sold 'em all off, and went with thishttp://www.ultimak.com/M8.htm |
|
Quoted:
I've tried pretty much every conventional scope rail/mount for the M1A. I sold 'em all off, and went with thishttp://www.ultimak.com/M8.htm What optic did you use on it? That's a lot of eye relief. |
|
Quoted:
Hey guys, I need to choose a scope mount for my M1A SOCOM II. Do you plan on using the iron sights much? If not, you should look at the CASM from M14.ca It replaces the rear sight, provides a fixed rear peep sight, the alloy version is light, and it's rock solid. If you like the forward mount as RAF suggested, you should also consider the SHG from M14.ca, it's equal to the UltiMAK, and it's lighter. A basic LER/EER scout scope is a good choice. Personally, I prefer a red dot sitting low enough out front that it doesn't require a cheek riser. |
|
Quoted:
Do you plan on using the iron sights much? If not, you should look at the CASM from M14.ca It replaces the rear sight, provides a fixed rear peep sight, the alloy version is light, and it's rock solid. If you like the forward mount as RAF suggested, you should also consider the SHG from M14.ca, it's equal to the UltiMAK, and it's lighter. A basic LER/EER scout scope is a good choice. Personally, I prefer a red dot sitting low enough out front that it doesn't require a cheek riser. Quoted:
Quoted:
Hey guys, I need to choose a scope mount for my M1A SOCOM II. Do you plan on using the iron sights much? If not, you should look at the CASM from M14.ca It replaces the rear sight, provides a fixed rear peep sight, the alloy version is light, and it's rock solid. If you like the forward mount as RAF suggested, you should also consider the SHG from M14.ca, it's equal to the UltiMAK, and it's lighter. A basic LER/EER scout scope is a good choice. Personally, I prefer a red dot sitting low enough out front that it doesn't require a cheek riser. I want to retain the ability to use iron sights. |
|
Quoted:
I want to retain the ability to use iron sights. OK, scout set-up as discussed, or a more traditional mount like the Smith Enterprise, or Sadlak mount with the iron sight tunnel, or an ARMS 18 that allows the use of irons when the scope/rings are removed. |
|
Bassett makes an excellent mount. It's inexpensive, works on about any receiver without having to attach or remove anything from the rifle.
http://bassettmachine.com/ |
|
Quoted:
Bassett makes an excellent mount. It's inexpensive, works on about any receiver without having to attach or remove anything from the rifle. http://bassettmachine.com/ Thanks but that wont work for me. The SOCOM II has some extra hardware on the Left receiver and I'm sure there is a scope mount specific to it. |
|
Quoted:
Thanks but that wont work for me. The SOCOM II has some extra hardware on the Left receiver and I'm sure there is a scope mount specific to it. Quoted:
Quoted:
Bassett makes an excellent mount. It's inexpensive, works on about any receiver without having to attach or remove anything from the rifle. http://bassettmachine.com/ Thanks but that wont work for me. The SOCOM II has some extra hardware on the Left receiver and I'm sure there is a scope mount specific to it. Use the top rail and add a scope or remove the rail and use any side receiver mount. |
|
Quoted:
What optic did you use on it? That's a lot of eye relief. Quoted:
Quoted:
I've tried pretty much every conventional scope rail/mount for the M1A. I sold 'em all off, and went with thishttp://www.ultimak.com/M8.htm What optic did you use on it? That's a lot of eye relief. There are two Burris pistol scopes whose eye relief will work well in this application. One is 7x max, and the other 12x max. Both scopes have reticular hold-over out to 500 yds. I use Leupold QRW mounts because they are the least expensive good rings that will return to zero, and not self-disassemble when dismounted. |
|
Quoted:
There are two Burris pistol scopes whose eye relief will work well in this application. One is 7x max, and the other 12x max. Both scopes have reticular hold-over out to 500 yds. I use Leupold QRW mounts because they are the least expensive good rings that will return to zero, and not self-disassemble when dismounted. Quoted:
Quoted:
Quoted:
I've tried pretty much every conventional scope rail/mount for the M1A. I sold 'em all off, and went with thishttp://www.ultimak.com/M8.htm What optic did you use on it? That's a lot of eye relief. There are two Burris pistol scopes whose eye relief will work well in this application. One is 7x max, and the other 12x max. Both scopes have reticular hold-over out to 500 yds. I use Leupold QRW mounts because they are the least expensive good rings that will return to zero, and not self-disassemble when dismounted. Thank you, I'll look for those. Can you tell me the model #s? Saint Peter |
|
Quoted:
Thank you, I'll look for those. Can you tell me the model #s? Saint Peter Quoted:
Quoted:
Quoted:
Quoted:
I've tried pretty much every conventional scope rail/mount for the M1A. I sold 'em all off, and went with thishttp://www.ultimak.com/M8.htm What optic did you use on it? That's a lot of eye relief. There are two Burris pistol scopes whose eye relief will work well in this application. One is 7x max, and the other 12x max. Both scopes have reticular hold-over out to 500 yds. I use Leupold QRW mounts because they are the least expensive good rings that will return to zero, and not self-disassemble when dismounted. Thank you, I'll look for those. Can you tell me the model #s? Saint Peter This will show the scopes:http://www.burrisoptics.com/handgun2x7x.html. Most folks buy the 2x7x32 (200279), but some opt for the posi-lock of the reticule (200299) For longer range work, the 3x12x32 (200309) might be preferred. Butler creek for scope lens covers, and http://camouflage.com/sunguard-fitchart.php for anti-reflection device for objective lens; fits inside scope lens cover. Natchez shooters supply often has blems and re-furbs of these scopes available; sign up for notification, and jump on it if the exact model you want comes up. Same unlimited lifetime warranty in either case. |
|
Quoted:
This will show the scopes:http://www.burrisoptics.com/handgun2x7x.html. Most folks buy the 2x7x32 (200279), but some opt for the posi-lock of the reticule (200299) For longer range work, the 3x12x32 (200309) might be preferred. Butler creek for scope lens covers, and http://camouflage.com/sunguard-fitchart.php for anti-reflection device for objective lens; fits inside scope lens cover. Natchez shooters supply often has blems and re-furbs of these scopes available; sign up for notification, and jump on it if the exact model you want comes up. Same unlimited lifetime warranty in either case. Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
I've tried pretty much every conventional scope rail/mount for the M1A. I sold 'em all off, and went with thishttp://www.ultimak.com/M8.htm What optic did you use on it? That's a lot of eye relief. There are two Burris pistol scopes whose eye relief will work well in this application. One is 7x max, and the other 12x max. Both scopes have reticular hold-over out to 500 yds. I use Leupold QRW mounts because they are the least expensive good rings that will return to zero, and not self-disassemble when dismounted. Thank you, I'll look for those. Can you tell me the model #s? Saint Peter This will show the scopes:http://www.burrisoptics.com/handgun2x7x.html. Most folks buy the 2x7x32 (200279), but some opt for the posi-lock of the reticule (200299) For longer range work, the 3x12x32 (200309) might be preferred. Butler creek for scope lens covers, and http://camouflage.com/sunguard-fitchart.php for anti-reflection device for objective lens; fits inside scope lens cover. Natchez shooters supply often has blems and re-furbs of these scopes available; sign up for notification, and jump on it if the exact model you want comes up. Same unlimited lifetime warranty in either case. Excellent suggestions! I'm going to solve my mounting problem with one of these scopes. I'm embarrassed I didn't think of it myself. |
|
It works for me, and fellow member M1A4ME, who has a lot of hands-on experience in a long-range setting. A very good test-bed, and also an inexpensive trainer rifle, is to equip a 10-22 with a Scout mount, and a basic Scout Scope. I have one of these also. Just so you know I've BTDT, and have put my money where my mouth is. Go to www.scoutrifle.org to read up on scout scoping systems, and see if it's for you. |
|
Here's what I decided on.
I found a Burris 2-7x 32mm Scout Scope with proper eye relief. http://im1.shutterfly.com/media/47a4db34b3127ccef64a3b1278b000000030O00AYsnLls3cMW4Pbz4A/cC/f%3D0/ls%3D00701876992120140516002921719.JPG/ps%3D50/r%3D0/rx%3D720/ry%3D480/ (I still don't know how to make links hot  )
Thanks again, Saint Peter |
Armory Sponsor