Armory Sponsor
Posted: 7/31/2008 3:13:42 PM EDT
| Can I safely use it if I remove the gas plug and cylinder, thus bleeding off all gas and turning it into a single shot? I got a bit of it real cheap... |
The spindle valve. WilsonCQB1911, I am not familiar with the load so I can not give you first hand advice on the load itself. If you are going to do bypass the gas system, consider getting a Schuster's gas nut. Adjust all the way out, then tune it until the rifle functions properly. The instructions are included. The adjustable gas system can reduce the pressure in the gas system and still allow the rifle to operate. Schuster's Adjustable Gas System |
|
Yep, I just closed the spindle valve. Nothing flew off the rifle -- no big explosions, no one was killed. The rifle did group a hell of a lot better though. Since the gas system isn't reciprocating and causing different lockups it put 10 rounds into about 1.5" with a red dot sight. Best I was getting before that was about 3" with the gas system on. Time to unitize my Scout.... |
Armory Sponsor