Armory Sponsor
Posted: 1/25/2013 6:26:01 AM EDT
|
Ok this might be a stupid question,But here goes. Will the the shell plates from the lnlap projector reloader work with the new lnlap reloader ?
|
|
Yes. -=*Maybe not! See my edit*=-
From the Hornady website "Current shell plates are designed to fit Lock-N-Load AP (both EZ-Ject and wire ejector models) and Pro-Jector presses." http://www.hornady.com/store/Shellplate-41-Lock-N-Load-AP-and-Projector/ <-- My source Edit :Oh... wait a minute. You were asking if the plates from a ProJector would work on the new AP. If it is a wire ejector then probably. If it is an EZ-Ject then no. |
|
Quoted:
Yes. -=*Maybe not! See my edit*=- From the Hornady website "Current shell plates are designed to fit Lock-N-Load AP (both EZ-Ject and wire ejector models) and Pro-Jector presses." http://www.hornady.com/store/Shellplate-41-Lock-N-Load-AP-and-Projector/ <-- My source Edit :Oh... wait a minute. You were asking if the plates from a ProJector would work on the new AP. If it is a wire ejector then probably. If it is an EZ-Ject then no. Hornady use to cut the EZ-ject groove under you older shell plate for $10. Don't know if they still do. A machine shop could probably make the cut also, but might cost more. |
Armory Sponsor