[ARCHIVED THREAD] - I need a load

Posted: 1/22/2013 7:47:31 PM EDT

Hey Folks,

I'm tooling up to do 9mm for a few matches coming up.
I'm using 147grn Montana Gold TMJ and I need to make power factor (about 900 fps)
I've been told titegroup is good, but I'm open to suggestions. Any ideas on a load

Thanks,
David

Posted: 1/23/2013 4:26:27 AM EDT

[#1]

Hi David,
My test with 147 MG using TG weren't near as good as with Winchester WSF. (Sig P226, PF 125 for IDPA). 4.1 - 4.2 gr WSF. 4" groups with TG, 2" groups with WSF at 20 yds. The temps were from 70F to 90F.

Posted: 1/23/2013 9:57:39 AM EDT

[#2]

3.5ish grains will put you right at 900 fps with that bullet loaded to 1.12"

Posted: 1/23/2013 10:22:42 AM EDT

[#3]

I only got 860fps using 4.1 WSF out of my 5" barrel Sig P226.

Posted: 1/23/2013 7:02:32 PM EDT

[#4]

I'm running a Glock 34. I like the tg load, but the Winchester looks promising too. I'll have to do a bit more research.

[ARCHIVED THREAD] - I need a load

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - I need a load

[ARCHIVED THREAD] - I need a load