Armory Sponsor
Posted: 1/31/2010 6:01:56 AM EDT
|
I was about to pick one of these up and saw it is only recommended for CCI and Winchester primers. Will it work with Wolf SRM primers? I assume it would and they don't want you to use it with soft bench rest primers.
Any other experience with this tool? thanks. |
|
Quoted: I was about to pick one of these up and saw it is only recommended for CCI and Winchester primers. Will it work with Wolf SRM primers? I assume it would and they don't want you to use it with soft bench rest primers. Any other experience with this tool? thanks. I've been using two of them for 12 years. One for small primers and one for large primers. Good product. |
I ordered another one and threw the old one in the box of Lee stuff I need to send back. |
I have 3 or 4 threads on this damn tool.
USUALLY it works great. My problem was that I had 2 #4 shell holders and 1 wasnt machined correctly and it's a PIA to load primers with it. Lots of cussing, spilled primers and mangled brass before I realized the shell holder was out of spec. Modify your order and get 2 shell holders. Other than that I love the tool. ETA - I love federal primers 205 and 205M's. They work fine in the tool - dont tell anyone though. I even put 100 in at a time............ |
|
Thanks again.
I saw the note from LEE and I did order a new shell holder for this press. I would have ordered two if I saw the post about out of spec holder. If it gives me issues I'll order another. Anything has to be better than the priming system on my LnL AP press. |
|
Possum Hollow makes an improved shell holder for the Lee primer tool
http://www.midwayusa.com/viewProduct/?productnumber=763028 |
Armory Sponsor