Armory Sponsor
Posted: 1/21/2014 4:47:00 AM EDT
| So my new 452-374 4cav, brass Hollow point mold is being sent to me from Mp-molds and it looks like I will not be able to use the Lee Alox lube for it? (I might be wrong) So I'm looking to buy a Lube sizer and would like to know what is a good one to buy and other then the lube what other items I would need to have when my molds show up? I have been saving up lead for the past year waiting for this mold to show up so I want to make sure everything is in order! Lead is old range lead most of it comes from Winchester Ranger JHP that we shoot at my department but it is a mix of lead. Thanks |
http://www.magmaengineering.com/component/banners/click/14/ Using an old Lyman 450 with NRA type 50/50 lube for many years. Not all 50/50 blends are the same. You may require a heater so the lube flows better when cold.  This 50/50 from http://www.lsstuff.com/ needs a heater. Alox has worked for me with a 45 acp 200 gr bullet, but Alox builds up in the seating die. You dont have this problem with a Lyman. Your mould would seem to be a rifle bullet? I would get a sizer if i didnt already have one.
|
Armory Sponsor