User Panel
[#1]
|
|
[#2]
It is ridiculously easy to link the ammo yourself. No tools needed. Dont buy anything to do it.
|
|
[#3]
Quoted:
Do you just buy links and slip them together? View Quote I do want one of these SAWs eventually though |
|
[#4]
Anyone know how lite a round you can shoot and still have this thing cycle reliably from belts? I've got plenty of ammo, but it's mixed .223 and 5.56 and the loads can vary quite a bit. Most of what I have is 55 and 62gr stuff like American Eagle .223, Prvi Partizan, Remington, PMC, Wolf Gold, etc etc. I hear that shooting it some and letting the links stretch out helps a bit.
|
|
[#6]
|
|
[#7]
Just noticed there's a nice used one on GB. Buy it now was $4,200. I just bought a pricey toy so I'm not in the market but thought I'd share. 19 hours to go.
|
|
[#8]
|
|
[#9]
View Quote |
|
[#10]
Quoted:
All models, but not all serial numbers. Use the link. View Quote Check Here |
|
[#11]
Was playing with the serial number site... Looks like numbers up to 5480 are affected. Wonder what changed...?
Is it really necessary to send the whole gun in? Do they provide shipping insurance in case it's lost, stolen, or damaged? |
|
[#12]
Quoted:
Was playing with the serial number site... Looks like numbers up to 5480 are affected. Wonder what changed...? Is it really necessary to send the whole gun in? Do they provide shipping insurance in case it's lost, stolen, or damaged? View Quote |
|
[#13]
I called to ask about the insurance and other questions, but was told that they didn't know the answers and that I'd get a call back. I'm still waiting to hear back from them. I'd seen a page *somewhere* that said you would have to pay for insurance and that FN was not responsible for damages during shipping. Sorry, but that's a bit of a deal breaker for me.
I think I'll wait til someone here gets their weapon back and can maybe, hopefully, report back on exactly what changes were made and why before I send mine in. At this point, I have too many questions and FN isn't providing any answers. At least not to my satisfaction. |
|
[#14]
I'd seen a page *somewhere* that said you would have to pay for insurance and that FN was not responsible for damages during shipping. Sorry, but that's a bit of a deal breaker for me. View Quote It arrived at FN this morning already, and has been signed for. I'll keep folks posted about any info I get back, timing, etc. |
|
[#15]
I wonder if I messed something up. I created an account, and requested a box and shipping label on the day they unannoucned the recall but I havent recieved it yet. Maybe I should be more patient or somethjng
|
|
[#16]
Are these temperamental when suppressed?
Seems like a chicken shit response from FN |
|
[#17]
I wonder if I messed something up. I created an account, and requested a box and shipping label on the day they unannoucned the recall but I havent recieved it yet. Maybe I should be more patient or somethjng View Quote |
|
[#18]
Quoted:
I wonder if I messed something up. I created an account, and requested a box and shipping label on the day they unannoucned the recall but I havent recieved it yet. Maybe I should be more patient or somethjng View Quote My rifle has been back at FN since Nov 1st. |
|
[#19]
I double checked my emails from them. Box and label are over due. Ill call tomorrow. Thanks guys
|
|
[#20]
|
|
[#21]
I called today. They said Im still due do the box and label. Wierd that other folks got theirs already. Ill call agian in a week if I dont get it
|
|
[#22]
Looking at getting into one of these in the para version. Anyone know who has the best price or any black Friday deals coming up!!! Thanks
|
|
[#23]
Quoted:
Looking at getting into one of these in the para version. Anyone know who has the best price or any black Friday deals coming up!!! Thanks View Quote M249s Para FDE Link |
|
[#24]
Quoted:
I called to ask about the insurance and other questions, but was told that they didn't know the answers and that I'd get a call back. I'm still waiting to hear back from them. I'd seen a page *somewhere* that said you would have to pay for insurance and that FN was not responsible for damages during shipping. Sorry, but that's a bit of a deal breaker for me. I think I'll wait til someone here gets their weapon back and can maybe, hopefully, report back on exactly what changes were made and why before I send mine in. At this point, I have too many questions and FN isn't providing any answers. At least not to my satisfaction. View Quote |
|
[#25]
That's absolutely true. When I bought my rifle from my local shop, the safety was completely stuck. I had to get a small hammer and knock it back to fire to disassemble the gun. Needless to say, charging the rifle while it's on safe is definitely a no no.
I have to tell everyone that touches my gun to not rack it because inevitably they go right for the charging handle. |
|
[#26]
i just leave the safety on fire full time. its an easy gun to clear so no point in it ever being on safe
|
|
[#27]
Yeah that's what I do. It's just counter intuitive so you really have to stop and think about the manual of arms.
Is it still an issue with them changing the slide hammer? |
|
[#28]
Quoted:
That's absolutely true. When I bought my rifle from my local shop, the safety was completely stuck. I had to get a small hammer and knock it back to fire to disassemble the gun. Needless to say, charging the rifle while it's on safe is definitely a no no. I have to tell everyone that touches my gun to not rack it because inevitably they go right for the charging handle. View Quote I just got my 249, and I have charged it both ways with no problems at all, so just wondering what gets hurt with the safety on if you charge it? Also I thought they said they were changing some part in the fire control group, due to unsafe firing condition, any more info you have as far as that goes? |
|
[#29]
Quoted: In FN "how to" videos doesn't it specifically tell customers to make sure the safety is on when charged? I just got my 249, and I have charged it both ways with no problems at all, so just wondering what gets hurt with the safety on if you charge it? Also I thought they said they were changing some part in the fire control group, due to unsafe firing condition, any more info you have as far as that goes? View Quote |
|
[#30]
Quoted: the cross bolt safety hits the sear surface and can damage it. the sear is on the slide hammer which is not how the full auto works. the full auto trigger group doesnt have a sear surface that can be damaged only the slide hammer on the semi. View Quote If the sear surface becomes damaged what happens exactly? I recall hearing a few stories when these were new depending on what kind of ammo you used, if it was underpowered enough it would cause the gun to have a burst, or go on a little FA run. I guess that could be a result of the sear being damaged and not resetting properly. In ether case I got mine with a ton of goodies for an absolute steal, and can't wait to shoot it! |
|
[#31]
How long did it take FN to repair and send back to you?
Quoted: i just got my 249s back looks like they replaced the slide hammer with a different one. according to the addendum they sent the safety will jam the slide hammer if the firearm is charged while the safety is on. i sent mine in filthy dirty greasy oily and the only part that was clean when i got it back was the slide hammer. View Quote |
|
[#32]
|
|
[#33]
Quoted: Thanks for this info. So is the change they have made a new slide hammer, that does not become damaged when the safety is engaged while charging? If the sear surface becomes damaged what happens exactly? I recall hearing a few stories when these were new depending on what kind of ammo you used, if it was underpowered enough it would cause the gun to have a burst, or go on a little FA run. I guess that could be a result of the sear being damaged and not resetting properly. In ether case I got mine with a ton of goodies for an absolute steal, and can't wait to shoot it! View Quote |
|
[#34]
Quoted: Thanks for this info. So is the change they have made a new slide hammer, that does not become damaged when the safety is engaged while charging? If the sear surface becomes damaged what happens exactly? I recall hearing a few stories when these were new depending on what kind of ammo you used, if it was underpowered enough it would cause the gun to have a burst, or go on a little FA run. I guess that could be a result of the sear being damaged and not resetting properly. In ether case I got mine with a ton of goodies for an absolute steal, and can't wait to shoot it! View Quote |
|
[#35]
I finally got my return box and label today. Does anyone have a photo of how its supposed to fit inside? I didnt pay attention to it when I unpacked mine
|
|
[#36]
google-fu
https://s3.amazonaws.com/mgm-content/sites/armslist/uploads/posts/2017/08/08/7173849_06_fn_m249s_para_5_56_13_7_black__640.jpg |
|
[#37]
|
|
[#38]
Not mine just a heads up if anyone needs rails.
Rail <a></a><a href="http://www.gunbroker.com/item/718768976"> </a> |
|
[#39]
Just FYI on the recall service timeline for any interested parties:
Shipping box requested and shipped to me on Oct 27 Box arrived on Oct 31 M249S packed and shipped out on Nov 6 Arrived and signed for at FN on Nov 7 Work reported as completed on Dec 18 Packed and shipped by FN on Dec 19 Scheduled for delivery to me on Dec 21 Edited to correct a date brainfart |
|
[#40]
Quoted:
Not mine just a heads up if anyone needs rails. Rail <a></a><a href="http://www.gunbroker.com/item/718768976"> </a> View Quote |
|
[#41]
Attached File
Shipped back to FN on NOV 25. Arrived NOV 28. Still waiting on getting it back. got my rifle back 23 DEC |
|
[#43]
I've been trying to check the recall serial number database for about a week, keep getting errors that there's a problem selecting the serial from the database. I tried random other numbers before and after mine and got the same error, anyone else having issues with it?
|
|
[#44]
so what lower handguard are you all using? trying to find one that's a pictanny lower. thanks
|
|
[#45]
Quoted:
so what lower handguard are you all using? trying to find one that's a pictanny lower. thanks View Quote Link |
|
[#46]
Wouldn't that thing interfere with the bipod folding up into the gun? And wouldn't it add some more weight?
|
|
[#47]
|
|
[#48]
Any idea how much weight it adds? Might be worth it to have a VFG on it.
|
|
[#49]
If you replace your bipod with newer style it folds up fine with the vertical grip.
|
|
[#50]
Quoted:
Any idea how much weight it adds? Might be worth it to have a VFG on it. View Quote Link |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.