Armory Sponsor
Posted: 5/10/2012 2:32:38 PM EDT
I just installed a K&M Aerospace lightning mod and it looks like one of the springs came loose and I cannot find how to properly re install it. Here is a pic of the parts below. can anyone help? Also a complete set of directions to disassemble and re assemble the trigger pack would be great for future cleaning. thanks. Also I emailed Ken about the trigger not resetting on the 2 lightest positions and he told me (as was stated on his website) that it should only do this on the lightest one. Thanks in advance.
ETA: More Pics 
If anything looks wrong Ill fix it and repost pics. Also it looks like just a pin holding in the hammer spring but it seems to be strong as hell I dont feel like wrestling it back in but shouldn't be hard to remove if you need to. |
|
I just uploaded a install video on you tube which should help aid in the install of the device.
http://www.youtube.com/watch?v=ACB2Rtm3Q1c Here is a picture with the lightning out and how the spring is folded over on to itself. http://i808.photobucket.com/albums/zz5/srfnken/MSAR%20Trigger%20Install/DSC00350.jpg |
|
Thanks for all your help. The installation video was great. Honestly dont. know how that spring got away from me. also i was absolutely certain I was putting that metal piece in correct. And was completely wrong. I pretty much think I know how to take apart the back half of the triger pack now. Ill put up some pics as its really good info to have. Thanks again ken.
Start making more MSAR stuff Im sure whatever it will be its what I need. 
|
| Iv always had the Nue trigger and it made a big difference. I just added the Lightning and haven't got to shoot it yet but you can absolutely tell the difference in trigger pull between all the settings. Im not sure how the Nue trigger will hold up to being taken off and putting back on so I wont be removing it but I will update as soon as I get it to the range. |
Armory Sponsor