Armory Sponsor
Posted: 11/25/2007 11:13:49 AM EDT
|
Since questions get periodically asked about the various weapon mounts available, it seemed like a good idea to have a consolidated thread illustrating them. Anyway, here are my typical configuratons: ARMS #40L, PVS-14 w/PRI mount, AP M3 w/ARMS #22M68 cantilever, SF M1-IR/XM05 w/ARMS #22L  Troy BUIS, PVS-14 + 3x magnifier w/PRI mount, AP M3 w/ARMS #22M68 cantilever, Da Torch illuminator  |
| Let's see some of your EO pics, so that folks don't start thinking that an AP is the best optic to use with a monocular....which we both know that it is not. I suspect that you probably have hundreds, but the thought was to show representative examples of the more common configurations. |
|
Here are some mounts on some NV rifle platforms. I have numerous pics I can post from time to time, here is a start on some newer ones. This is my main master blaster NV training/demo rifle Raptor 4x with a ARM#19 along with an ATILLA IR laser also with an ARMS dual throw mount. Weapon is a Noveske 6.8SPC with a Larue rail. Good out to 400M+, anything more call in a JDAM!    Another Raptor 4X I just received on an LMT with a DBAL A (2) hanging out in front.  Another training weapon is my D-740 on a older SPC with its integral screw mount. SOON to have a new QD for the D-740/760 using a Larue LT100. Also ARMS #17 here on a 100mW GCP.  D-740 on a ARMS #19 along with a PAQ-4C.  Another training weapon I use for long range. D-760 with its integral screw mount on an ARMS SIR 18" 6.8 SPC. PEQ-2A out in front.   Same weapon with a DBAL unit at the Shot Show with Magpul. Magpul just released their PRS and were showing it off with my D-760.   More to come..... |
|
That is an excellent illustration of the G&GG's ability to simultaneously mount a J-arm, which the PRI does not allow. It also puts the controls in a more "natural" rotation for one who is used to running the monocular over the left eye when helmet mounted. Any chance of you posting some more pics of the mount both mated and de-mated? |
 I remember now....You had to modify (make it bit narrower) so the throw lever of the GG&G would clear Larue's mount. Thanks for the pics and the order!  Edited, Zack, where you get that cool SF poster? I need one of those!
|
Armory Sponsor