Armory Sponsor
Posted: 5/28/2025 12:47:47 PM EDT
Pre-order up $1900 for 30-06 or .308 https://thecmp.org/introducing-the-m1-garand-by-cmp-a-new-chapter-begins/ |
|
Originally Posted By NotIssued: I'm a little disappointed it can still only handle M2 spec ammo instead of any .30-06. Then again part of me thinks that metallurgy has to have improved in 80 years, so it might be ok.... It's the long spindly op-rod that's the issue not the receiver. |
|
Originally Posted By bpm990d: It's the long spindly op-rod that's the issue not the receiver. Originally Posted By bpm990d: Originally Posted By NotIssued: I'm a little disappointed it can still only handle M2 spec ammo instead of any .30-06. Then again part of me thinks that metallurgy has to have improved in 80 years, so it might be ok.... It's the long spindly op-rod that's the issue not the receiver. Yep. Op rod geometry hasn’t changed in 90 years. |
|
I don't like the price very much, but I also don't think there's a ton of profit built in there. I'd imagine building a Garand from scratch is expensive. |
"All planes close up tight . . .we'll have to ditch unless landfall . . .when the first plane drops below 10 gallons, we all go down together."
|
Originally Posted By tsg68: That’s about what a base level M14/M1A service type rifle will cost you. Originally Posted By tsg68: Originally Posted By TOTHEMAX: 1900, ouch. That’s about what a base level M14/M1A service type rifle will cost you. Still hurts. |
3-7-77
Proud Member of the Leather Head Mafia
“In my opinion, the M1 Rifle is the greatest battle implement ever devised” - George S. Patton
Proud Member of the Leather Head Mafia
“In my opinion, the M1 Rifle is the greatest battle implement ever devised” - George S. Patton
|
Originally Posted By tsg68: That’s about what a base level M14/M1A service type rifle will cost you. Yep, and the sad part is that to make it a match consistent performer you need another $2k in it on top of that. 3-4MOA if you dont. |
“You either know and understand history or you trust the government. You can’t do both”
|
Originally Posted By Findsman: I kinda want to try the .308 version but I'm not sure I want to be a beta tester for $1900.  I will be keeping an eye on them though! You can have a real Garand with a shot-out ‘06 barrel re-barreled to .308/7.62 for less than $1900.00. That’s what I did to this one, a Gun Shop ‘rescue.’ Original barrel was a tomato stake with high ME and TE readings. Shipped it to Shuff’s Parkerizing for re-barreling with a Criterion .308. We also re-stocked it with new Minelli wood. Now it’s a great shooter.  |
|
Originally Posted By Nick_Adams: You can have a real Garand with a shot-out ‘06 barrel re-barreled to .308/7.62 for less than $1900.00. That’s what I did to this one, a Gun Shop ‘rescue.’ Original barrel was a tomato stake with high ME and TE readings. Shipped it to Shuff’s Parkerizing for re-barreling with a Criterion .308. We also re-stocked it with new Minelli wood. Now it’s a great shooter. https://i.imgur.com/rGKSE1j.jpg Olongapo stock pouch? |
|
Originally Posted By DonFlynn: As long as you can still get the Experts these seem like a non seller. i do understand eventually those will run out but until then I can't see them selling well. Attached File I do appreciate them making the rifles though. |
"He had the right hand of the devil strapped tightly to his side."-The Last Cowboy
|
Originally Posted By DonFlynn: As long as you can still get the Experts these seem like a non seller. i do understand eventually those will run out but until then I can't see them selling well. There will be a market for them when the OG M1's run out and people will start selling their CMP $800-$900 rifles for $2500-$3k. |
I hated going to weddings. All the grandmas would poke me and say "You're next". They stopped that when I started doing it to them at funerals.
Sic semper evello mortem tyrannis
Sic semper evello mortem tyrannis
|
Originally Posted By 50cal: There will be a market for them when the OG M1's run out and people will start selling their CMP $800-$900 rifles for $2500-$3k. Originally Posted By 50cal: Originally Posted By DonFlynn: As long as you can still get the Experts these seem like a non seller. i do understand eventually those will run out but until then I can't see them selling well. There will be a market for them when the OG M1's run out and people will start selling their CMP $800-$900 rifles for $2500-$3k. People are doing that now. I can't see me buying 1, I got a Expert when they were $1K and had Fulton Armory tune it up and repark it for around $500 bucks. For $1500 bucks I have a "new" M1 Garand that I only shoot a couple times a year. |
|
Originally Posted By tsg68: Olongapo stock pouch? Originally Posted By tsg68: Originally Posted By Nick_Adams: You can have a real Garand with a shot-out ‘06 barrel re-barreled to .308/7.62 for less than $1900.00. That’s what I did to this one, a Gun Shop ‘rescue.’ Original barrel was a tomato stake with high ME and TE readings. Shipped it to Shuff’s Parkerizing for re-barreling with a Criterion .308. We also re-stocked it with new Minelli wood. Now it’s a great shooter. https://i.imgur.com/rGKSE1j.jpg Olongapo stock pouch? Correct. |
|
Originally Posted By NotIssued: I get that but you'd think it can be made of a better steel mix. I don't know shit all about metallurgy but I know we have 90 years of progress. That has to count for something. Originally Posted By NotIssued: Originally Posted By ckbk: Yep. Op rod geometry hasn’t changed in 90 years. I get that but you'd think it can be made of a better steel mix. I don't know shit all about metallurgy but I know we have 90 years of progress. That has to count for something. You could make a lighter op rod, bolt, & receiver out of titanium, but given the geometry of the forged op-rod you're not gonna end up w/ something stronger w/o making it larger & thus changing the geometry. Dammit! How light could you make an 18" .308 Garand w/ a titanium receiver, op rod, & bolt? 
|
I sell firearms produced by the finest child labor in the world, be it Filipino, Muslim, Mormon, Arizonan, or Texan.
|
Originally Posted By backbencher: Originally Posted By backbencher: Originally Posted By NotIssued: Originally Posted By ckbk: Yep. Op rod geometry hasn’t changed in 90 years. Dammit! How light could you make an 18" .308 Garand w/ a titanium receiver, op rod, & bolt? A titanium Mini-G would be the Cat’s Ass!  |
Armory Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter