[ARCHIVED THREAD] - PlumCrazy Lower Help

Posted: 7/16/2011 4:46:52 PM EDT

Good day ladies and gents. I was swapping pistol grips on my PlumCrazy lower and the safety lever fell out. My question is; Can a standard safety lever be put back in there to replace the ploy one, or do I have to contact the company and have them fix it? Thanks for the help.

Posted: 7/17/2011 11:52:31 AM EDT

[#1]

Most likely their's nothing wrong with the selector. You just lost the safety selector detent when you pulled the grip off.

ETA: I don't see why a standard safety selector woudln't work but i've never seen one of these lowers in person.

Posted: 7/17/2011 9:42:13 PM EDT

[#2]

Thanks. The only thing that concerns me is that I think the detent was actually "cast" in the polymer, and not a separate piece.

Posted: 7/18/2011 7:10:17 AM EDT

[#3]

Quoted:
Thanks. The only thing that concerns me is that I think the detent was actually "cast" in the polymer, and not a separate piece.

The detent, by its very purpose must be a seperate piece. If it is a standard size safety, you should have no problems as long as you still have the spring and detent

Posted: 7/22/2011 10:02:17 PM EDT

[#4]

Thanks for the help. I got everything put back together tonight and it seems to working just fine.

Posted: 7/23/2011 12:12:39 AM EDT

[#5]

I turned one of mine into a postie. Replaced all the parts with metal full auto ones and the detent with metal ones. All good

[ARCHIVED THREAD] - PlumCrazy Lower Help

Armory Sponsor

Warning

Confirm Action

[ARCHIVED THREAD] - PlumCrazy Lower Help

[ARCHIVED THREAD] - PlumCrazy Lower Help