Armory Sponsor
Posted: 11/26/2008 12:57:49 PM EDT
|
I have my M11/9 can mounted on my .338 spectre. What size would I need to make the hole through the wipes to be as tight as possible w/o touching the round and disturbing it's passage?
i.e. what would the diameter of the exit hole for a purpose designed .338 suppressor be? What about 9mm? I'm not worried about absolute suppression, more accuracy. Regards Jess |
|
Quoted:
I suspect you're operating in an area where the ATFE would have a different opinion of your activity that you would. Thank you for your concern. http://www.cs.cmu.edu/afs/cs/user/wbardwel/public/nfalist/atf_letter66.txt I still need a measurement on the exit inside diameter. |
|
wipes are supposed to make contact with the round.
if you don't want anything making contact just leave the wipes out of the end cap. if you really want to you could just punch out something larger than the diameter of the round. i use 1/4 holes for 9mm and it works well but it does make contact with the round. |
|
Quoted:
I suspect you're operating in an area where the ATFE would have a different opinion of your activity that you would. Wrong. You aren't allowed to bore a baffle larger. A wipe is not a baffle. Therefore, you may do whatever you want to a wipe. As for actually doing it...if the hole you make isn't PERFECT, it is going to mess up your accuracy anyway. I would either leave it in, or take it out completely. |
Armory Sponsor