Armory Sponsor
Posted: 6/3/2015 9:51:05 PM EDT
| What PSI are you guys running while sandblasting slides for cerakote. |
|
Grit blast the parts with #100 to #120 grit aluminum oxide or garnet sand at 80 to 100 psi. Lightly blast (30-40 psi) non-metal parts such as: wood, fiberglass, plastic or polymer. For anodized aluminum parts, set the blasting pressure to 30-40 psi. Strive for an even blast pattern over the surface of the part. This is right off Cerakote's website for the H series |
|
Quoted:
Grit blast the parts with #100 to #120 grit aluminum oxide or garnet sand at 80 to 100 psi. Lightly blast (30-40 psi) non-metal parts such as: wood, fiberglass, plastic or polymer. For anodized aluminum parts, set the blasting pressure to 30-40 psi. Strive for an even blast pattern over the surface of the part. This is right off Cerakote's websitefor the H series FYI, same for C-series. |
Armory Sponsor