Armory Sponsor
Posted: 5/12/2016 11:51:43 PM EDT
|
Is there any issue with using a standard ½x28 thread with a Spectre II.
Seems like it would bugger up the o-ring I'm looking for an adapter for an M&P 22 compact. It's hard for me to tell from S&W's website but their factory adapter doesn't appear to have the relief cut. I also have an SR22 and the adapter for it isn't SiCo spec |
|
Quoted:
As long as the thread is 0.4" in length, there will be no issues with the threads contacting the o-ring. Posted Via AR15.Com Mobile Thanks. I'll see if the adapter I was looking at has that spec listed. Does the thread not contacting the o-ring cause any issues I.e. can coming loose? |
|
Quoted: Does the thread not contacting the o-ring cause any issues I.e. can coming loose? No issues - it's just like any plain rimfire threaded application. The issue arises when standard threads are longer than 0.4" and you run into the o-ring, either tearing the o-ring or causing alignment issues. |
|
Quoted: Thanks. I'll see if the adapter I was looking at has that spec listed. Does the thread not contacting the o-ring cause any issues I.e. can coming loose? Quoted: Quoted: As long as the thread is 0.4" in length, there will be no issues with the threads contacting the o-ring. Posted Via AR15.Com Mobile Thanks. I'll see if the adapter I was looking at has that spec listed. Does the thread not contacting the o-ring cause any issues I.e. can coming loose? My Spectre II loosens almost immediately on my Tac Sol Buckmark barrel. It's a real pain. I got the SilencerCo 1/2x28 to 1/2x28 w/ o-right surface adapter that will hopefully fix the problem. It just arrived yesterday and I'm going to shoot it tomorrow. It looks kinda goofy but if it works I will be happy, I'm always nervous shooting that gun knowing that the can unscrews itself. |
|
Quoted:
My Spectre II loosens almost immediately on my Tac Sol Buckmark barrel. It's a real pain. I got the SilencerCo 1/2x28 to 1/2x28 w/ o-right surface adapter that will hopefully fix the problem. It just arrived yesterday and I'm going to shoot it tomorrow. It looks kinda goofy but if it works I will be happy, I'm always nervous shooting that gun knowing that the can unscrews itself. Quoted:
Quoted:
Quoted:
As long as the thread is 0.4" in length, there will be no issues with the threads contacting the o-ring. Posted Via AR15.Com Mobile Thanks. I'll see if the adapter I was looking at has that spec listed. Does the thread not contacting the o-ring cause any issues I.e. can coming loose? My Spectre II loosens almost immediately on my Tac Sol Buckmark barrel. It's a real pain. I got the SilencerCo 1/2x28 to 1/2x28 w/ o-right surface adapter that will hopefully fix the problem. It just arrived yesterday and I'm going to shoot it tomorrow. It looks kinda goofy but if it works I will be happy, I'm always nervous shooting that gun knowing that the can unscrews itself. You might try plumbers teflon tape on the threads. It works well on my handguns. I use the SiCo adaptor on my rifles since most are under the rail. |
|
Quoted:
My Spectre II loosens almost immediately on my Tac Sol Buckmark barrel. It's a real pain. I got the SilencerCo 1/2x28 to 1/2x28 w/ o-right surface adapter that will hopefully fix the problem. It just arrived yesterday and I'm going to shoot it tomorrow. It looks kinda goofy but if it works I will be happy, I'm always nervous shooting that gun knowing that the can unscrews itself. Quoted:
Quoted:
Quoted:
As long as the thread is 0.4" in length, there will be no issues with the threads contacting the o-ring. Posted Via AR15.Com Mobile Thanks. I'll see if the adapter I was looking at has that spec listed. Does the thread not contacting the o-ring cause any issues I.e. can coming loose? My Spectre II loosens almost immediately on my Tac Sol Buckmark barrel. It's a real pain. I got the SilencerCo 1/2x28 to 1/2x28 w/ o-right surface adapter that will hopefully fix the problem. It just arrived yesterday and I'm going to shoot it tomorrow. It looks kinda goofy but if it works I will be happy, I'm always nervous shooting that gun knowing that the can unscrews itself. That's what I was looking for. Sounds like I might as well get the SiCo adapter for my M&P and save myself the trouble Where did you get your ½x28 to ½x28 adapter? |
Armory Sponsor