Armory Sponsor
Posted: 12/31/2013 7:11:41 PM EDT
| huhuchuhuhcuhuhuhcuhuhcdu |
|
it was a lower i had already built, and since i am not riding around in the car with it , i didn't see a need for a collapsable stock…..and even with this stock its still about 4-5 inches shorter than an m4 with an 18 inch barrel stock collapsed … its got an overall length of 26 inches… not bad with a full length fixed stock
|
| it really shoots amazing….. i shot one my buddy had at the range and fell in love went home that night and bought one…..i heard you can only get the 762 mod 1 if you are active duty military……… they stopped offering them for civilians about a year ago… oh, the mags came from PWS and i have had no issues at all… i am actually going to try to run this set up in a local 3 gun shoot and see how that goes.. |
|
Quoted:
You mean an upper with no ejection port....at all!!! Anyone else notice this? LOL  Quoted:
Quoted:
Any leads on where to find that upper? You mean an upper with no ejection port....at all!!! Anyone else notice this? LOL The top picture looks mirrored??? notice everything is all jacked up |
|
Quoted:
The top picture looks mirrored??? notice everything is all jacked up Quoted:
Quoted:
Quoted:
Any leads on where to find that upper? You mean an upper with no ejection port....at all!!! Anyone else notice this? LOL The top picture looks mirrored??? notice everything is all jacked up Yep, that's the joke. 
|
|
Quoted:
Too bad they don't offer these anymore. I was really wanting one. Me too. I called a year ago and they said they weren't selling like the Backouts were so they dropped them. I don't need another strange caliber that I can't find ammo for so I won't get one. However I do have a pile of 7.62x39 ammo and mags to boot. 
|
| I've got an original FDE 762 diablo. It's the complete rifle from pws. I switched to a pws heavy tungsten buffer and sprinco red spring. It ran perfect with original equipment but I like the recoil pulse better with the new buffer and spring. I only shoot the rifle suppressed and have been 100% with the new combo. |
|
Quoted:
I've got an original FDE 762 diablo. It's the complete rifle from pws. I switched to a pws heavy tungsten buffer and sprinco red spring. It ran perfect with original equipment but I like the recoil pulse better with the new buffer and spring. I only shoot the rifle suppressed and have been 100% with the new combo. I've got a factory PWS Diablo SBR, but I didn't switch springs. The gun ran fine in semi (most of the time) but would FTF on full (RR lower). only tried 3 mags (ASI) and was using Wolf 150gr soft points steel cased ammo. I tried the red spring and a heavier buffer, but that exacerbated the problem in semi-auto, so I went back to the factory spring and buffer. I only put about 270 rounds through it, so it's not broken in yet, but that shouldn't cause all the FTF's, should it? Not hijacking the thread , just stating my problems with this upper.
|
|
Quoted:
I've got a factory PWS Diablo SBR, but I didn't switch springs. The gun ran fine in semi (most of the time) but would FTF on full (RR lower). only tried 3 mags (ASI) and was using Wolf 150gr soft points steel cased ammo. I tried the red spring and a heavier buffer, but that exacerbated the problem in semi-auto, so I went back to the factory spring and buffer. I only put about 270 rounds through it, so it's not broken in yet, but that shouldn't cause all the FTF's, should it? Not hijacking the thread , just stating my problems with this upper.Quoted:
Quoted:
I've got an original FDE 762 diablo. It's the complete rifle from pws. I switched to a pws heavy tungsten buffer and sprinco red spring. It ran perfect with original equipment but I like the recoil pulse better with the new buffer and spring. I only shoot the rifle suppressed and have been 100% with the new combo. I've got a factory PWS Diablo SBR, but I didn't switch springs. The gun ran fine in semi (most of the time) but would FTF on full (RR lower). only tried 3 mags (ASI) and was using Wolf 150gr soft points steel cased ammo. I tried the red spring and a heavier buffer, but that exacerbated the problem in semi-auto, so I went back to the factory spring and buffer. I only put about 270 rounds through it, so it's not broken in yet, but that shouldn't cause all the FTF's, should it? Not hijacking the thread , just stating my problems with this upper.What ammo are you using? I had ftf issues with one certain type of ammo. I think it was golden bear hollow points. The tip was too soft and would deform on the edge of the feed ramp causing the ftf. I could replicate the same ftf with same ammo in a 7.62x39 mk114. The rifle will run the golden bear soft points and fmj all day long. Edit: just realized you listed the ammo type. Try another brand of ammo and see if problem persists. |
|
Quoted:
You mean an upper with no ejection port....at all!!! Anyone else notice this? LOL Quoted:
Quoted:
Any leads on where to find that upper? You mean an upper with no ejection port....at all!!! Anyone else notice this? LOL It goes back to the days when HK was playing around with the caseless cartridge ora Volacnic from the 1850's! 
|
|
Quoted:
Tell me how you got a mod 1 in 7.62x39. I've been looking for one to go on my Punisher lower, but have only found a few mod 0's that were priced rediculously. I don't know if you guys heard, but PWS just announced they are making a limited run of the 7.62x39 upper/barrel assemblies. They are doing SBR/pistol length (7.75" barrels) and longer (16" barrels) upper assemblies. link to info about limited run of PWS 7.62x39 uppers HighSpeedSteel |
Armory Sponsor