Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
Armory Sponsor
11/16/2006 4:00:20 PM EDT
Okay guys...and b4 you wonder this isn't going to be a post about how to thread them but my question is....

I have a 2 pc MAV w/ X harness and I put my mag pouches on.  Upon loading it all up and wearing it...the female part of the malice clips from the pouches rub on me b/c they hang off the bottom.  Would I be better to move the pouches one row up and have the MAV material between the clip and me?

Thanks guys.

11/16/2006 4:45:28 PM EDT
[#1]
Have you tried turning the clips upside down?
11/16/2006 5:03:47 PM EDT
[#2]

Quoted:
Have you tried turning the clips upside down?


i thought about it but was gonna gather a general consensus b4 hand

thanks for chimin in!
11/16/2006 6:40:27 PM EDT
[#3]
Another option, if you have enough MOLLE webbing, is to move the clip up one level, but leave the pouch mounted at the same height. That way the bottom of the clip is between the bootom of the pouch and the bottom of harness.
11/16/2006 7:36:16 PM EDT
[#4]
Between adjusting the position of the pouches, putting the large section at the top and adjusting the position of the MAV to run a little higher you should be able to get it comfortable.

Speaking of uncomfrotable, you should have seen the bruises on my legs from using MALICE clips on the front of a belt rig...
11/16/2006 8:26:36 PM EDT
[#5]

Quoted:
Between adjusting the position of the pouches, putting the large section at the top and adjusting the position of the MAV to run a little higher you should be able to get it comfortable.

Speaking of uncomfrotable, you should have seen the bruises on my legs from using MALICE clips on the front of a belt rig...


i bet that sucked.  thx for all your help guys...pics due up tomorrow
11/16/2006 9:33:41 PM EDT
[#6]
upside down and toughen up.
Armory Sponsor