Warning

 

Close
Confirm Action

Are you sure you wish to do this?

Cancel Confirm
AR15.COM
9/2/2008 12:12:50 PM EDT
Anyone familiar with them? I'm looking at possibly buying some used.
Three power packs and 6 heads around 3600 WS total is about all the info I have on them. Major use would be lighting for indoor sports. I tried google, didn't find anything.
9/2/2008 1:27:43 PM EDT
[#1]
O  L  D  stuff for sure!

Check w/ some photo strobe repair shops for parts.  In the Atlanta area these are the guys I would go to;

John J Morgan Electronics, Inc
212 Lauren Lane
Canton, GA 30114
678-493-2923


Over 18 years ago we had a 1600ws power pack that used a modified Speedotron Blackline 102/Brownline M11 heads.  I can't remember the price but it was a pack & 2 heads for $$$.$$.  They were nearly bullet proof dependable power but by today's standard of mono-light strobes its a DINOSAUR.

If your using them for game(Basket & Volley ball) shots try to use a lower power setting than full power so the flash duration is relatively fast.  Also if they are the Speedo heads look in to Speedotron's 'Sports Reflector' http://www.speedotron.com/products/show_image/87.  
It has a mirror finish on the inside & is set up to focus the light in a tighter pattern for better f/stops at range.

Shoot me a IM if you have any questions.

7mm
9/2/2008 2:52:27 PM EDT
[#2]
Thanks for the info.
9/2/2008 5:36:58 PM EDT
[#3]
Just had another question okay 2 questions; what color are the packs & heads?  And to be really picky, does it say speedotron or ascor on the cords from the heads to the pack?

The color will help pin point the vintage & the name on the cord will help ID the heads thus which reflector mount will work.

7mm
9/2/2008 7:17:45 PM EDT
[#4]

Quoted:
Just had another question okay 2 questions; what color are the packs & heads?  And to be really picky, does it say speedotron or ascor on the cords from the heads to the pack?

The color will help pin point the vintage & the name on the cord will help ID the heads thus which reflector mount will work.

7mm


I have not seen them yet so I am unsure.