Posted: 5/21/2002 9:02:19 PM EDT
| How do I take the regular stock off of the Bushmaster 16" Carbine and replace it with a different one? |
|
1) Separate form the upper. 2) Push down the "Buffer Detent" located inside the lower toward the back. 3) Take out the top screw on the back of the stock. 4) Slide stock off of the "Buffer Tube" (watch out for the "Buttstock Spacer" it will be loose in the stock. 5) Unscrew the "Buffer Tube" with by using a wrench on the back of the tube. (make sure the "Buffer Detent" does not go flying) 6) When replacing the buffer tube, make sure you screw it in far enough to hold the "Buffer Detent" in place. I hope this helps. [:D] Have fun |
| First slide the takedown pin out and flip open your gun, hold the buffer back and take out the buffer retainer pin and spring (You dont have to but they will pop out if you dont) now start unscrewing the stock, and when you are about to get it off watch out for the takedown pin detent spring, (right under where your stock unscrews) cause its going to want to pop out. thats it, your done |
|
Quoted: Quoted: OK,OK...I get the message TROJANBAN![stick] Did you try it yet??? How did it go?? |