Posted: 2/2/2005 4:47:20 PM EDT
| I'm looking for a gun coating that I can spray on from a can and bake on or air dry. Where do I buy this at online? |
|
ive used the teflon/moly without roughing up the surface, but will need to on an aluminum piece. one can IS enough for a couple rifles. if you doing a rifle be sure you can fit in your oven, hanging it under the rack works best, figure this out before you spray. a small piece of plywood with small holes drilled in it and wire inserted into the holes with a hook on the end makes a good system for spraying small parts, then just put the whole thing in the oven. open the doors and windows and run a fan to help keep the cooking smell down, its not horrible, and will pass quickly with more ventilation. keep some light grit sandpaper around to remove drips, use 2 light coats and follow the instructions on the can. |