[ARCHIVED THREAD] - Keltec PF-9 problem...

Posted: 4/27/2009 5:05:41 PM EDT

I just took apart my fathers carry gun to clean it. I have never really messed with his PF-9 and when I went to put it back together it is about 1/16 of an inch from lining up correctly so i can replace the Assembly pin. is there some "keltec trick" i am missing?? any help is appreciated.

Posted: 4/27/2009 5:08:24 PM EDT

[#1]

bump

Posted: 4/27/2009 5:09:03 PM EDT

[#2]

Shake it ... the barrel is loose if I remember correctly and will wiggle around.

Posted: 4/27/2009 5:09:52 PM EDT

[#3]

ooooooooooooooooooo you are IN TROUBLE............

Posted: 4/27/2009 5:18:41 PM EDT

[#4]

bump

Posted: 4/27/2009 5:19:16 PM EDT

[#5]

Have the manual? During re-assy you must push the barrel down w/your thumb (thru the ejection port) as you push the slide back. It's a bit tricky, but easy once you've done it a few times.

Posted: 4/27/2009 5:19:40 PM EDT

[#6]

how old are you and what is your dad going to say when he finds out

Posted: 4/27/2009 5:21:35 PM EDT

[#7]

im 21. my dad knows. he carries, but i am the "gun guy". This is why i was cleaning his gun :)

Posted: 4/27/2009 5:22:58 PM EDT

[#8]

Quoted:
Have the manual? During re-assy you must push the barrel down w/your thumb (thru the ejection port) as you push the slide back. It's a bit tricky, but easy once you've done it a few times.

This

I had the same problem

Posted: 4/27/2009 5:23:37 PM EDT

[#9]

Tutorials on KTOG.org.