OFFICIAL Print/Parts/CAD request thread. All part/CAD requests go through this thread! (Page 16 of 18)
|
Originally Posted By TacNac: If that replaces both base pads, I got it for you if you cover the shipping. If you're wanting something that holds the base pads somehow, I'm not sure. Either will work. I was looking for something that replaces the base plates as a starting point. I will send you a Message. Thanks! |
$ň@ĢĢLĕŦ%Ŧĥ
|
Could I get some help with a remix? I need a set of dividers to separate one square compartment into four narrow rectangles at full height. Doesn't need a floor. Just needs to separate small lipo packs. Doesn't need to be pretty, just a fast and easy print. https://www.printables.com/model/941004-flat-tackle-box-storage-system The boxes are $4 at Walmart. I don't mind sending a few bucks or ordering one delivered so you don't have to go to Walmart. ETA: Failed to specify which storage box I had. https://www.walmart.com/ip/Ozark-Trail-Large-Swirl-Tray-Fishing-Tackle-Box-3700-Lime/561990878 |
|
Originally Posted By smullen: Sorry I haven't updated this in a few, I've been super busy with work and family issues. I wanted to thank @SCUL for doing these for me. They came out better than I expected. I've not got to try them in the field yet, but they look perfect and fit exactly as I'd hoped. Thanks again for doing this. I appreciate it and your skillz!!!! Also, thanks to anyone else that comented and lent an ear or suggestion. This continues to be a Great and very useful Thread!!!! I use dollar store cutting boards for that. 
|
World ain't what it seems, is it Gunny?
|
Originally Posted By only1asterisk: Could I get some help with a remix? I need a set of dividers to separate one square compartment into four narrow rectangles at full height. Doesn't need a floor. Just needs to separate small lipo packs. Doesn't need to be pretty, just a fast and easy print. https://www.printables.com/model/941004-flat-tackle-box-storage-system The boxes are $4 at Walmart. I don't mind sending a few bucks or ordering one delivered so you don't have to go to Walmart. @only1asterisk Do you have a picture or link to the tackle box you have? Do you need only the STL/file or do you need it printed? Do you know the dimensions of the compartment you need separated into four rectangles? |
|
Originally Posted By -Obsessed-: @only1asterisk Do you have a picture or link to the tackle box you have? Do you need only the STL/file or do you need it printed? Do you know the dimensions of the compartment you need separated into four rectangles? Originally Posted By -Obsessed-: @only1asterisk Do you have a picture or link to the tackle box you have? Do you need only the STL/file or do you need it printed? Do you know the dimensions of the compartment you need separated into four rectangles? I have several, but they are all at work. I was hoping it would be a simple thing to modify the existing files. Let me look around. https://www.printables.com/model/941004-flat-tackle-box-storage-system/files#preview.file.KWaA2 If I could get this one with each side divided in half again it should work. ETA: Forgot to specify which storage tray in the OP. Fixed. |
|
I’m looking to get this Meshtastic enclosure for the RAKWireless WisMesh Board One 3D printed: Printables link Here •Quantity: Just 1 enclosure. •Material: PLA or PETG is fine (whatever you usually run). •Color: Not picky—any color works. •Detail/Tolerance: Just standard print quality is fine, nothing crazy. •Deadline: No rush. •Shipping: I’m located in NY, happy to cover actual shipping costs. Thanks in advance to anyone willing to help out! This request is completed |
|
Originally Posted By smeeg: I'm looking to get this Meshtastic enclosure for the RAKWireless WisMesh Board One 3D printed: Printables link Here Quantity: Just 1 enclosure. Material: PLA or PETG is fine (whatever you usually run). Color: Not picky any color works. Detail/Tolerance: Just standard print quality is fine, nothing crazy. Deadline: No rush. Shipping: I'm located in NY, happy to cover actual shipping costs. Thanks in advance to anyone willing to help out! |
Joined:
Oct 2025
Posts:
1
EE: 0% (0)
TX, USA
| New account here, got sent over from the enos forums. Springfield Armory doesn't sell just parts so I'm unable to buy followers for my magazines and nobody in the aftermarket space is creating followers for the hellcat pro mags. I have a 3D printer and run it reasonably well, just need someone to design the follower in CAD. I gave it a shot in fusion and it was deceptively hard trying to reverse engineer that geometry. Happy to cover shipping costs for a follower to base off of if needed+time for this. |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
30581
EE: 100% (5)
MN, USA
|
Originally Posted By Obvious1: New account here, got sent over from the enos forums. Springfield Armory doesn't sell just parts so I'm unable to buy followers for my magazines and nobody in the aftermarket space is creating followers for the hellcat pro mags. I have a 3D printer and run it reasonably well, just need someone to design the follower in CAD. I gave it a shot in fusion and it was deceptively hard trying to reverse engineer that geometry. Happy to cover shipping costs for a follower to base off of if needed+time for this. |
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
Joined:
Oct 2025
Posts:
2
EE: 0% (0)
TX, USA
| Just checked grabcad and nothing hit there, same thing over at the odd sea although I’ll admit I’m not the best at using their website. I’ve checked the usual haunts of thingi, makers world, Prusa, yeggi/stl finder. If anyone’s aware of a premade file already please do point me in the right direction. As far as I’m aware the normal hellcat and hellcat pro use the same followers, but I can’t find a file for either. |
|
I've got a f-ton of Sabre marked (Calvary Arms CAV-15) lowers. A lot of them don't have but plates. These are the same as the GWACS lowers and take A1 style trapdoor buttplates (preferable) or even simpler they came with a minimalist style buttplate with texture. Even something like this would work (just the flat part). Does anyone have a file for or can design one of these so I don't have to buy 50 of them? For the trapdoor model, I'd make the buttplate out of TPU and the trapdoor and latch out of something solid. For the minimalist style, I'd make it out of something solid. Thanks in advance, Popov |
|
Hello gurus. Is there a service out there, where I can send my stl to have modeled up better? Meaning, Ive made a thing that has seen some success....but I would like to"perfect" my model. My modeling skills have gotten it "done" but there are plenty imperfections or things not perfectly aligned. Id like to take my model to the next level and just dont have the cad skills. Figured id ask. Thanks hive. |
|
Originally Posted By GripnAK47s: Hello gurus. Is there a service out there, where I can send my stl to have modeled up better? Meaning, Ive made a thing that has seen some success....but I would like to"perfect" my model. My modeling skills have gotten it "done" but there are plenty imperfections or things not perfectly aligned. Id like to take my model to the next level and just dont have the cad skills. Figured id ask. Thanks hive. Native cad or step, yes. STL is a different beast. You can send me a PM |
|
I have never done anything with 3D printing. I was looking for the older Tapco SAW grip for the LimaSix project and they don’t make them anymore. Is this the right place where I could contract with someone to make me one? I found this, is it a useable file? https://defcad.com/library/ar-15-saw-style-grip/ Thanks for the help. |
I don't know how this works, but I nominate Joker and Fluffy for arfcom sainthood.
|
Originally Posted By hollowhandle: I have never done anything with 3D printing. I was looking for the older Tapco SAW grip for the LimaSix project and they don’t make them anymore. Is this the right place where I could contract with someone to make me one? I found this, is it a useable file? Thanks for the help. This is the right place, but you should avoid using defcad because they're slimebags. If you search Gun CAD Index there are a couple results that you might like. Let me know if you want one. Attached File |
|
Thank you. This one looks fairly close to the Tapco one. Sorry for linking the slime bags. Can't Link directly to guncadindex, they have sot stuff. Rat Sorry about that as well. This one looks pretty close. Attached File |
I don't know how this works, but I nominate Joker and Fluffy for arfcom sainthood.
|
Originally Posted By hollowhandle: Thank you. This one looks fairly close to the Tapco one. Sorry for linking the slime bags. https://www.ar15.com/media/mediaFiles/44438/IMG_0379_jpeg-3649561.JPG Originally Posted By hollowhandle: Thank you. This one looks fairly close to the Tapco one. Sorry for linking the slime bags. https://www.ar15.com/media/mediaFiles/44438/IMG_0379_jpeg-3649561.JPG I will get one going for you in the morning. Originally Posted By hollowhandle: Can't Link directly to guncadindex, they have sot stuff. Rat Why? They don't host files, it's just an index page. No different than linking to google even though google shows results for glock switches. |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
30716
EE: 100% (5)
MN, USA
|
Why? They don't host files, it's just an index page. No different than linking to google even though google shows results for glock switches. Originally Posted By hollowhandle: Can't Link directly to guncadindex, they have sot stuff. Rat Why? They don't host files, it's just an index page. No different than linking to google even though google shows results for glock switches. If it were me, we would have a sticky with the awesomest files, but not my business, so I also play by the rules. |
Strong men create good times. Good times breed weak men. Weak men create hard times. (You are here) Hard times breed strong men.
|
Originally Posted By hollowhandle: Thank you. This one looks fairly close to the Tapco one. Sorry for linking the slime bags. Can't Link directly to guncadindex, they have sot stuff. Rat Sorry about that as well. This one looks pretty close. https://www.ar15.com/media/mediaFiles/44438/IMG_0379_jpeg-3649561.JPG @hollowhandle PM me an address Attached File |
|
Thank you. It looks great. Attached File |
I don't know how this works, but I nominate Joker and Fluffy for arfcom sainthood.
Joined:
Dec 2023
Posts:
5089
EE: 100% (7)
USA
|
Hi folks, I'd like to start out by saying I don't know the first thing about 3D printing, and that I want to comply with your rules and protocol 100% in this part request. It's just a battery spacer to use CR2 batteries in my PVS-2 night vision scope. I did not create this file, and I don't know if it has all necessary information. The description says this is a 1.1 hour print. I have no idea if that's accurate or not. I'd appreciate any response or guidance! https://makerworld.com/en/models/1314268-an-pvs-2-battery-adapter#profileId-1349049  " />
|
Joined:
Dec 2023
Posts:
5093
EE: 100% (7)
USA
|
Originally Posted By -Obsessed-: @ELittlefield How many you need? Color preference? I assume black but can do just about any color. Pretty much have the whole rainbow. I can do this and get it out Tuesday. Can you PM me your address so I can get an idea of shipping for you? Man, that's awesome! One unit would be great, in OD green if you have it? Otherwise black is completely fine. I'll PM you. |
|
Originally Posted By ELittlefield: Man, that's awesome! One unit would be great, in OD green if you have it? Otherwise black is completely fine. I'll PM you. Forgot to take a pic but two of them are in the mailbox headed out to you! The design isn't the best, you may need/want to sand down the corners depending on how much play they built into it. Let me know if any of the dimensions don't work for you or if you want tweaks and I can just design one from scratch to suit your specs. 
|
Member
Joined:
Dec 2023
Posts:
5132
EE: 100% (7)
USA
|
Originally Posted By -Obsessed-: Forgot to take a pic but two of them are in the mailbox headed out to you! The design isn't the best, you may need/want to sand down the corners depending on how much play they built into it. Let me know if any of the dimensions don't work for you or if you want tweaks and I can just design one from scratch to suit your specs. Originally Posted By -Obsessed-: Originally Posted By ELittlefield: Man, that's awesome! One unit would be great, in OD green if you have it? Otherwise black is completely fine. I'll PM you. Forgot to take a pic but two of them are in the mailbox headed out to you! The design isn't the best, you may need/want to sand down the corners depending on how much play they built into it. Let me know if any of the dimensions don't work for you or if you want tweaks and I can just design one from scratch to suit your specs. Understood, thank you very much! |
Member
Joined:
Dec 2023
Posts:
5345
EE: 100% (7)
USA
|
Request: Armoloq Anderson powerpole Mount Prints Hey everyone, Looking to see if someone here can help me out with a print. I need two (2) Armoloq Anderson Mounts printed from the following model: Printables link: https://www.printables.com/model/1115902-armoloq-anderson-mount Details: •Quantity: 2 •Material: ASA or ABS •Color: Any (preferably black) •Infill: 40–50% (or whatever you recommend for strength) •Supports: As needed •No special tolerances required besides it fitting the Anderson powerpole •No deadline — whenever someone has time . Can pay for the shipping Shipping would be to NY Edit Someone I know in real life printed this for me. |
|
Originally Posted By smeeg: Request: Armoloq Anderson powerpole Mount Prints Hey everyone, Looking to see if someone here can help me out with a print. I need two (2) Armoloq Anderson Mounts printed from the following model: Printables link: https://www.printables.com/model/1115902-armoloq-anderson-mount Details: •Quantity: 2 •Material: ASA or ABS •Color: Any (preferably black) •Infill: 40–50% (or whatever you recommend for strength) •Supports: As needed •No special tolerances required besides it fitting the Anderson powerpole •No deadline — whenever someone has time . Can pay for the shipping Shipping would be to NY Hey just started a massive project but if nobody gets this in two weeks or so I'll be able to do it. I can do black ASA or ABS, either way. Will it see a lot of sunlight? If so I'd go ASA. If not I'd go ABS, ABS doesn't fatigue quite as easy and is better suited for snap fit pieces (Legos are made of ABS for this reason). |
|
Originally Posted By -Obsessed-: Hey just started a massive project but if nobody gets this in two weeks or so I'll be able to do it. I can do black ASA or ABS, either way. Will it see a lot of sunlight? If so I'd go ASA. If not I'd go ABS, ABS doesn't fatigue quite as easy and is better suited for snap fit pieces (Legos are made of ABS for this reason). I have someone printing it for me thanks for the offer though! |
|
So, I have 2 DPMS G2's in 308. The shell deflectors on them are pretty much non existent. Me, shooting left handed, either get hit in the right shoulder or worse, the right cheek bone by ejecting brass. This can and had left bruising and cuts on my cheek. I have tried a stick on foam "deflector brake" made for AR15's, but the G2 has a much smaller and differently shaped deflector, that it does not fit, does not help, and will not stay on. I was thinking about some type of deflector that mounts to the pic rail and sticks down off the side to deflect the cases forward, away from me. I found this online, and while it will not fit my gun, it is basically along the same idea as I was looking for. https://freestateguncompany.com/picatinny-rail-mount-shell-deflector-3-d-printed/ I also found this thing, which is also along the same idea I am looking for, however I am not sure if it would fit my gun. I suppose, if someone could print one of those, I could try it and see if it fits and what may need changed. https://3dgunbuilder.com/accessories/case-deflector-t91-ar15/ Here are a couple pictures of my upper. Now I have the optic mounted back, but I have enough room to move it forward enough to clear a pic rail mounted deflector. Anyone think they might want to tackle something like this? Or at minimum, print the one in the 2nd link for me to try?  
|
|
Originally Posted By Jeeps-And-Guns: So, I have 2 DPMS G2's in 308. The shell deflectors on them are pretty much non existent. Me, shooting left handed, either get hit in the right shoulder or worse, the right cheek bone by ejecting brass. This can and had left bruising and cuts on my cheek. I have tried a stick on foam "deflector brake" made for AR15's, but the G2 has a much smaller and differently shaped deflector, that it does not fit, does not help, and will not stay on. I was thinking about some type of deflector that mounts to the pic rail and sticks down off the side to deflect the cases forward, away from me. I found this online, and while it will not fit my gun, it is basically along the same idea as I was looking for. https://freestateguncompany.com/picatinny-rail-mount-shell-deflector-3-d-printed/ I also found this thing, which is also along the same idea I am looking for, however I am not sure if it would fit my gun. I suppose, if someone could print one of those, I could try it and see if it fits and what may need changed. https://3dgunbuilder.com/accessories/case-deflector-t91-ar15/ Here are a couple pictures of my upper. Now I have the optic mounted back, but I have enough room to move it forward enough to clear a pic rail mounted deflector. Anyone think they might want to tackle something like this? Or at minimum, print the one in the 2nd link for me to try? https://live.staticflickr.com/65535/54779361505_0980080edb_b.jpg https://live.staticflickr.com/65535/54779251969_b9fb4ecb76_b.jpg Do you have any room forward of the optic? I'm thinking the best approach given you are a lefty is a TC Accessories styled deflector. The purple deflector in your second link I still think would fly up and hit you. A TC style will drop it right down. Do you own a digital caliper? |
|
Originally Posted By -Obsessed-: Do you have any room forward of the optic? I'm thinking the best approach given you are a lefty is a TC Accessories styled deflector. The purple deflector in your second link I still think would fly up and hit you. A TC style will drop it right down. Do you own a digital caliper? Not familiar with the TC style you speak of, and I am not sure if my google searching is finding the right thing. There is a little room in front of the optic, enough to move it forward some, but not enough to mount something in front of it, unless you go way forward onto the handguard. I dislike the handguard that is on it, I hate the gap there is, and the size/shape. But there are not any other options out there. I have a sampson on my other one, but it requires the use of a very specific barrel nut that is no longer available. Otherwise I would buy one of them for this one. So I am stuck with this handguard. Hell, at this point, I am really not opposed to drilling/tapping holes in the flat of the receiver between the ejection port and the rail and screw something to the side of it. Or doing the same thing to the deflector to screw a larger one on top of it. Here is a picture of it. You can see the foam "deflector brake" on there, but it keeps falling off and does not deflect brass forward. And yes, I have digital calipers. 
|
|
Request Completed by @BBrinks Thank you!! Print shown below Hey guys, got a P2S with AMS for Christmas and looking for someone to model me up a stand for a hatchet a close friend gave me to display on my book shelf. I gave it a shot on Fusion but well beyond my current capabilities. Looking to have it sit like the first photo, maybe with the butt end sunken into the print? Just have PLA basic currently for filament. I’m very new but any help would be great! Attached File Attached File Attached File Attached File Printed beautifully on the P2S 
|
|
Originally Posted By plinker8: Hey guys, got a P2S with AMS for Christmas and looking for someone to model me up a stand for a hatchet a close friend gave me to display on my book shelf. I gave it a shot on Fusion but well beyond my current capabilities. Looking to have it sit like the first photo, maybe with the butt end sunken into the print? Just have PLA basic currently for filament. I’m very new but any help would be great! https://www.ar15.com/media/mediaFiles/434409/IMG_2040_jpeg-3683824.JPGhttps://www.ar15.com/media/mediaFiles/434409/IMG_2041_jpeg-3683825.JPGhttps://www.ar15.com/media/mediaFiles/434409/IMG_2042_jpeg-3683826.JPGhttps://www.ar15.com/media/mediaFiles/434409/IMG_2043_jpeg-3683827.JPG I can give you a hand with that, will be pretty easy to model up. |
|
That looks great! |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
31052
EE: 100% (5)
MN, USA
|
Originally Posted By Rat_Patrol: The removable bit? Don't import anything, just make a sketch with dimensions. Grab a caliper and go. |
|
Originally Posted By HazMatt90: Yeah, I've tried that too. Again, I'm not good at it and I've learned a lot today, but I've been at it a LONG time with no good results. I can't get all the angles right and there are a lot of support structures to get right as well. Do you have a scanner at home? If you can lay it flat on the scanner with a ruler or something near it for scale I can help you get the dimensions/profile. What does the inside structure look like? |
|
Originally Posted By BBrinks: Do you have a scanner at home? If you can lay it flat on the scanner with a ruler or something near it for scale I can help you get the dimensions/profile. What does the inside structure look like? Here's one of the better photos I tried importing and tracing. It always came out skewed |
|
Originally Posted By HazMatt90: https://www.ar15.com/media/mediaFiles/372467/IMG_8318_jpeg-3685914.JPG Here's one of the better photos I tried importing and tracing. It always came out skewed Imported it into Creo but the top and bottom right holes may be off a smidge due to the perspective. If you want to PM me I can send you the dxf or stp file |
|
Looking to have a Starlink Mini mounting setup printed for a Harbor Freight Apache 3800 case. Parts needed: •Main mounting plate / bracket •Any knobs or latch/hold-down parts associated with securing the plate (if separate files) Models: MakerWorld (Apache 3800 Starlink Mini Mount): Mourning plate 3800 Apache case starlink Knobs They’re is also similar STL files out there for the Apache 3800 if you think another is superior or easier to print I’m also open to that. Details: •Quantity: 1 full set •Material: Open to recommendations •Tolerances: No ultra-precision required — this is for field use. •Finish: Doesn’t need to be pretty, just functional •Color: Doesn’t matter •Deadline: None — no rush Shipping: •I’m located in New York State •Happy to cover actual shipping costs only, per thread rules |
|
Originally Posted By smeeg: Looking to have a Starlink Mini mounting setup printed for a Harbor Freight Apache 3800 case. Parts needed: •Main mounting plate / bracket •Any knobs or latch/hold-down parts associated with securing the plate (if separate files) Models: MakerWorld (Apache 3800 Starlink Mini Mount): Mourning plate 3800 Apache case starlink Knobs They’re is also similar STL files out there for the Apache 3800 if you think another is superior or easier to print I’m also open to that. Details: •Quantity: 1 full set •Material: Open to recommendations •Tolerances: No ultra-precision required — this is for field use. •Finish: Doesn’t need to be pretty, just functional •Color: Doesn’t matter •Deadline: None — no rush Shipping: •I’m located in New York State •Happy to cover actual shipping costs only, per thread rules If you just need that printed as-is I can help you out with it. I have some extra black PETG material I’ll use so there won’t be any issues with deformation if it’s left in a hot car. I have the heat-set inserts as well, you might just need to buy a couple screws. |
|
Looking for a file to print the Leonidas statue or some help making one. I’ve tried the makers ai in bambu studio and its just not working for me. This is what i want to print Attached File |