OFFICIAL Print/Parts/CAD request thread. All part/CAD requests go through this thread! (Page 2 of 18)
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
15276
EE: 100% (5)
MN, USA
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
15291
EE: 100% (5)
MN, USA
|
Originally Posted By tonyfac1: I really don't know. These were taken by a friend of mine. I don't want to spend $170 for a stock just for the plastic spacer. Get some measurements and make sure it is an extruded 2D design, and I can whip that up. Will need center-to-center of the circles ideally, or how far apart the circles are, plus diameter. |
Strong men create good times. Good times breed weak men. Weak men create hard times. Hard times breed strong men.
My CAD designs: https://www.thingiverse.com/rat_patrol/designs
My CAD designs: https://www.thingiverse.com/rat_patrol/designs
|
Here is an idea/request. Thanks for any replies. The ENVIS night vision monocular is a budget friendly Gen. 3 monocular. It was originally designed for air crews to use in an escape and evade situation. These units are designed to be hand held, but can be helmet mounted. There are two design features that are commonly seen as detractors. First, the battery compartment door uses a small screw that sometimes fails, or the door itself cracks. Second, a half shell adapter is needed to properly align the housing with a J-arm. The half shell slides onto the housing and repositions the mounting hole. The idea is to print a half shell adapter that incorporates the battery door as one piece. It could slide on or off as a unit, eliminating a failure point. That simple fix would be a great upgrade. As printers, is that something that seems viable? With the number of ENVIS units in circulation, it might even make a good side hustle. Here are a couple of pictures to illustrate. (File photo that shows 1/2 shell adapter, fitted to ENVIS housing.) Attached File (Photo that shows battery compartment door) Attached File |
Double Distinguished
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
15657
EE: 100% (5)
MN, USA
|
Originally Posted By tonyfac1: Here is what I got from him. I do believe it is extruded. Top tube dia. (w/ sleeve) = 19.5mm Bottom tube dia. = 15.8mm Spacer width = 15mm Gap between tubes = 11mm Thanks I must apologize, I completely forgot about this. Please check out this image to confirm measurements. All measurements are in mm. Obviously a view from the top. The "extrusion" would be then 15mm, correct? The center-to-center between the circular parts is 28.65mm, making an 11mm gap between them. 
|
Strong men create good times. Good times breed weak men. Weak men create hard times. Hard times breed strong men.
|
I was pointed to this thread when I posted a request in Team. Didn't know this thread existed. I need something non-firearms related printed. I need two rings printed to help me get my pullover rubber diving dry gloves on. They need to be about 5.5" in diameter and about 2"-3" wide. Some people use pieces of PVC pipe for this, but I tried several home improvement/hardware stores around me. None will custom cut small PVC pieces and I can't do it myself (no tools, workshop, etc.). Please see this video. The rings are shown about the 2:10 mark. I can't get the file for the rings. It's unavailable. You'd have to make up the file yourself and I have absolutely no clue how easy or difficult that is! If I could have these by the Wednesday before Thanksgiving, that would be fabulous. It would be ideal to have them for my cavern/intro to cave diving class Thanksgiving weekend, so I wouldn't have to ask buddy or instructor for help with my gloves! Thank you!   How To Select Easy Inexpensive Dry Gloves for Scuba Divers |
"They know what shipwrecks are, for out of sight of land, however inland, they have drowned full many a midnight ship with all its shrieking crew." - Herman Melville, Moby Dick, 1851, on the Great Lakes
|
Originally Posted By Marie: I was pointed to this thread when I posted a request in Team. Didn't know this thread existed. I need something non-firearms related printed. I need two rings printed to help me get my pullover rubber diving dry gloves on. They need to be about 5.5" in diameter and about 2"-3" wide. Some people use pieces of PVC pipe for this, but I tried several home improvement/hardware stores around me. None will custom cut small PVC pieces and I can't do it myself (no tools, workshop, etc.). Please see this video. The rings are shown about the 2:10 mark. I can't get the file for the rings. It's unavailable. You'd have to make up the file yourself and I have absolutely no clue how easy or difficult that is! If I could have these by the Wednesday before Thanksgiving, that would be fabulous. It would be ideal to have them for my cavern/intro to cave diving class Thanksgiving weekend, so I wouldn't have to ask buddy or instructor for help with my gloves! Thank you!  https://www.youtube.com/watch?v=U2c3vAE9cxs5.5" Inner Diameter? Creating the model should be pretty easy. I can print it out, DM me for coordination and payment for shipping. I have something on the printer until tomorrow morning, so these should print tomorrow and be in the mail monday. |
post_count += 1
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
|
Originally Posted By scul: 5.5" Inner Diameter? Creating the model should be pretty easy. I can print it out, DM me for coordination and payment for shipping. I have something on the printer until tomorrow morning, so these should print tomorrow and be in the mail monday. Pic of my dry suit sleeve ring that the glove would go over. The printed ring needs to be a big bigger than this, but also allowing for glove.  Thank you so much. Sending you a PM. |
"They know what shipwrecks are, for out of sight of land, however inland, they have drowned full many a midnight ship with all its shrieking crew." - Herman Melville, Moby Dick, 1851, on the Great Lakes
|
Gentlemen, I would like to know if any one would be interested in printing a AR15 hand grip with thumb shelf and index finger hold off. The kicker is it’s left handed. Thanks for reading. I do not have a file a this would need designed. I can make a model with modeling clay and ship to you. |
“Socialism only works in two places: Heaven where they don't need it and hell where they already have it.." - Ronald Reagan
Of all the things you lost it's your mind you miss the most
Of all the things you lost it's your mind you miss the most
|
I have a request : My kids saw this Apollo boot print picture and want a cookie stamp. I looked all over and can't find a ready made one but I did dig up a 3D printed file and tutorial. https://www.thingiverse.com/thing:3760269 Anyone interested in printing? I suppose a size of 2.5" long would suffice-perfect for cookies. I have no idea on materials to use. The kids saw this Pic and were intrigued. Attached File |
NorCal LEO Offically Sanctioned Callsign: "Hold Fast"
"Shooting is like sex. I aint real good at it but I like to do it." ~Pangea
"Shooting is like sex. I aint real good at it but I like to do it." ~Pangea
I designed this 1/35 scale SCR-610 radio for a modeling project but I only have access to a printer which prints this like a blob. Can anyone make a better copy or am I out of lack at this size?  Supposed to look like this:   https://www.tinkercad.com/things/99CCl2wPb6l-scr-610/edit?sharecode=DCXtnB8bWKHtxrRs4gQj0IaTCwilXGYKAhdr8pf8HMY |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
16028
EE: 100% (5)
MN, USA
|
Originally Posted By brich2929: I have a request : My kids saw this Apollo boot print picture and want a cookie stamp. I looked all over and can't find a ready made one but I did dig up a 3D printed file and tutorial. https://www.thingiverse.com/thing:3760269 Anyone interested in printing? I suppose a size of 2.5" long would suffice-perfect for cookies. I have no idea on materials to use. The kids saw this Pic and were intrigued. https://www.AR15.Com/media/mediaFiles/339553/Screenshot_20201210-233735_Amazon_Shoppi-1725307.JPG I can print this for you, but here is some info you need to absorb first: 3D printing, in itself, is NOT food safe. Please watch this video:  How to make food-safe 3D printed models I have some natural/not colored PLA coming, to be here next week. I also have a coated steel nozzle coming which will be going in my printer. It IS coated with some magical teflon stuff, not plain steel. I also have a well used brass nozzle in the machine that can be used. If you still want to proceed, let me know. |
Strong men create good times. Good times breed weak men. Weak men create hard times. Hard times breed strong men.
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
16029
EE: 100% (5)
MN, USA
|
Originally Posted By AR45fan: I designed this 1/35 scale SCR-610 radio for a modeling project but I only have access to a printer which prints this like a blob. Can anyone make a better copy or am I out of lack at this size? https://live.staticflickr.com/65535/50707307697_19e57c81e2_c.jpg Supposed to look like this: https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Fmilitary.trcvr.ru%2Fwp-content%2Fuploads%2F2015%2F09%2FBC-659.png&f=1&nofb=1 https://live.staticflickr.com/65535/50706493983_fb70a5aee8_c.jpg https://www.tinkercad.com/things/99CCl2wPb6l-scr-610/edit?sharecode=DCXtnB8bWKHtxrRs4gQj0IaTCwilXGYKAhdr8pf8HMY |
Strong men create good times. Good times breed weak men. Weak men create hard times. Hard times breed strong men.
|
Originally Posted By Rat_Patrol: You will need a resin printer to get any kind of detail at that size. I know a couple members here have them, maybe one will chime in and add it to a project. Resin printing is messy stuff, and is a full messy/involved workflow, so doing just a piece like that on its own really isn't practical. Thanks, I appreciate the feedback. |
|
Anyone willing to print this 3 part revolver cylinder pencil holder for me? I don't know much about 3d printers so I will leave the type of filament and printing specs to those that know more then me. I would like it printed so the details are as clean as possible. Black or a dark color is preferred. https://www.thingiverse.com/thing:23564 |
|
Originally Posted By AR45fan: I designed this 1/35 scale SCR-610 radio for a modeling project but I only have access to a printer which prints this like a blob. Can anyone make a better copy or am I out of lack at this size? https://live.staticflickr.com/65535/50707307697_19e57c81e2_c.jpg Supposed to look like this: https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Fmilitary.trcvr.ru%2Fwp-content%2Fuploads%2F2015%2F09%2FBC-659.png&f=1&nofb=1 https://live.staticflickr.com/65535/50706493983_fb70a5aee8_c.jpg https://www.tinkercad.com/things/99CCl2wPb6l-scr-610/edit?sharecode=DCXtnB8bWKHtxrRs4gQj0IaTCwilXGYKAhdr8pf8HMY I can do this for you. @AR45fan |
|
Attached File Can anyone make me a cupholder insert? I will gladly pay you for your time/materials. Here's what I'm looking for: Base 3" outside diameter, 4" tall. That fits in my existing cupholder. Top part needs to be right around 3.75" inside diameter, Transition doesn't necessarily need to be angled. Base edges can be chamfered. Ive tried a couple of things from Amazon but none of them are tall enough in the base. Thanks in advance. |
|
Needing this part printed for a baofeng UV5R. I am needing about 25 of them. This is not for me as I am assisting a local elementary school in fixing their radios. I will gladly pay shipping and materials cost. Thanks Attached File |
|
Originally Posted By swampfoxoutdoors: Needing this part printed for a baofeng UV5R. I am needing about 25 of them. This is not for me as I am assisting a local elementary school in fixing their radios. I will gladly pay shipping and materials cost. Thanks https://www.ar15.com/media/mediaFiles/424008/Untitled_jpg-1821543.JPG I can do this for you @swampfoxoutdoors |
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
17063
EE: 100% (5)
MN, USA
|
Originally Posted By ReaperBJJ: Need 2 of these Olight M-lok switch holders printed in black. Thanks in advance! https://www.thingiverse.com/thing:4717460 I've got gun metal grey PETG or black PLA+ if either one of those will help you out. |
Strong men create good times. Good times breed weak men. Weak men create hard times. Hard times breed strong men.
|
I have a Remington V3 Tactical that I want t o put a Magpul SGA 870 Stock on. The Remington Tac-13 (V3) uses the same birds head grip as the Tac-14 (870) by using an adapter. An Arf buddy has leant me his adapter to have fabricated. The machinist I was going to use said he could do it but it would be expensive. A guy that I work with said he had a friend that could 3d print anything so I gave it to him. A month later the part comes back and 'Mr. I can 3d print anything' says he would need to purchase a new program and probably a new computer to run it. Even then he may not be able to use his 3d printer. Has anybody here done this sort of thing or would they be interested in it? I have one other person locally the may be able to machine a new adapter. If not that's my 3 strikes and I'm out. @PNFLDS Attached File Attached File Attached File Attached File Attached File |
Team Member since 11NOV2010 courtesy of TheRocketmac, Thank You Sir.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
17103
EE: 100% (5)
MN, USA
|
Originally Posted By jsucraig: I have a Remington V3 Tactical that I want t o put a Magpul SGA 870 Stock on. The Remington Tac-13 (V3) uses the same birds head grip as the Tac-14 (870) by using an adapter. An Arf buddy has leant me his adapter to have fabricated. The machinist I was going to use said he could do it but it would be expensive. A guy that I work with said he had a friend that could 3d print anything so I gave it to him. A month later the part comes back and 'Mr. I can 3d print anything' says he would need to purchase a new program and probably a new computer to run it. Even then he may not be able to use his 3d printer. Has anybody here done this sort of thing or would they be interested in it? I have one other person locally the may be able to machine a new adapter. If not that's my 3 strikes and I'm out. @PNFLDS https://www.ar15.com/media/mediaFiles/176597/IMG_1948_JPG-1879247.JPG https://www.ar15.com/media/mediaFiles/176597/IMG_1949_JPG-1879249.JPG https://www.ar15.com/media/mediaFiles/176597/IMG_1950_JPG-1879251.JPG https://www.ar15.com/media/mediaFiles/176597/IMG_1951_JPG-1879252.JPG https://www.ar15.com/media/mediaFiles/176597/IMG_1952_JPG-1879253.JPG Basically, if that adapter has to handle any load other than that of a washer, it really needs to be metal, unless I'm seeing it wrong. |
Strong men create good times. Good times breed weak men. Weak men create hard times. Hard times breed strong men.
|
Anyone that can print this for me? https://www.thingiverse.com/thing:4112127 My motherboard didn't come with the IO shield and I'd prefer not to order one from China. |
|
Originally Posted By Rat_Patrol: Does that adapter have only compressive strain on it? The material is darn thin for anything other than compressive stresses. Basically, if that adapter has to handle any load other than that of a washer, it really needs to be metal, unless I'm seeing it wrong. It's an adapter to install a Stock for a Remington 870 shotgun onto the receiver of a Remington V3 Tactical Shotgun. It basically fills the gap, changes the angle, and adapts the dimensions of the V3 receiver to the dimensions of the 870 stock. The stock that I am going to use is the Magpul SGA 870 Stock which is made of Magpul polymer. The stock attachment bolt goes through the stock, the adapter, and then threads into the back of the receiver. So I guess it is mostly used as a washer, a very special washer. |
Team Member since 11NOV2010 courtesy of TheRocketmac, Thank You Sir.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
|
Originally Posted By jsucraig: It's an adapter to install a Stock for a Remington 870 shotgun onto the receiver of a Remington V3 Tactical Shotgun. It basically fills the gap, changes the angle, and adapts the dimensions of the V3 receiver to the dimensions of the 870 stock. The stock that I am going to use is the Magpul SGA 870 Stock which is made of Magpul polymer. The stock attachment bolt goes through the stock, the adapter, and then threads into the back of the receiver. So I guess it is mostly used as a washer, a very special washer. What about casting? |
|
Originally Posted By PNFLDS: What about casting? Any ideas on who does casting or how to do casting? |
Team Member since 11NOV2010 courtesy of TheRocketmac, Thank You Sir.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
|
Wow I had no idea this was a thing, awesome thread! I have a request if someone would be so kind; an exhaust hanger for my KTM. I don’t know anything about anything when it comes to this stuff, but have this page saved with the files(?) to make it, it’s offered freely for anyone with a printer to use. https://www.thingiverse.com/thing:4644095?fbclid=IwAR0cc4Cd4pdisdBkzZhT5yXOH7kgQKqMXEAWa5MsUHsrW8dzXkR8hkQM23U |
Psalm 144:1 Praise the Lord my Rock, who trains my hands for war and my fingers for battle.
Callsign: "Nub"
Callsign: "Nub"
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
17124
EE: 100% (5)
MN, USA
|
Originally Posted By Abominable: Wow I had no idea this was a thing, awesome thread! I have a request if someone would be so kind; an exhaust hanger for my KTM. I don't know anything about anything when it comes to this stuff, but have this page saved with the files(?) to make it, it's offered freely for anyone with a printer to use. https://www.thingiverse.com/thing:4644095?fbclid=IwAR0cc4Cd4pdisdBkzZhT5yXOH7kgQKqMXEAWa5MsUHsrW8dzXkR8hkQM23U |
Strong men create good times. Good times breed weak men. Weak men create hard times. Hard times breed strong men.
|
Originally Posted By Rat_Patrol: Just as a heads up, that will need to be printed in Nylon or other very high temp engineering plastic due to the heat it will deal with. Ideally, that part should be aluminum. I assume that means it would be more expensive to produce. I understand that payment is verboten, but could I buy someone that is willing to print it the materials they would need? |
Psalm 144:1 Praise the Lord my Rock, who trains my hands for war and my fingers for battle.
Callsign: "Nub"
Callsign: "Nub"
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
17129
EE: 100% (5)
MN, USA
|
Hi Folks, Looking for one of these: https://www.thingiverse.com/thing:2854294 In particular, the file 1_piece_70mm.stl It's an extension for a flight sim joystick. Would need to be black. I suspect it receives some failt=y high forces as the joystick gets moved around. Thanks in advance. |
Team Ranstad
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
17150
EE: 100% (5)
MN, USA
|
Originally Posted By entropy: Hi Folks, Looking for one of these: https://www.thingiverse.com/thing:2854294 In particular, the file 1_piece_70mm.stl It's an extension for a flight sim joystick. Would need to be black. I suspect it receives some failt=y high forces as the joystick gets moved around. Thanks in advance. No matter the orientation, there will be overhangs that are not bridges, and the support material could not be removed. Even soluble supports (unless they dissolve 100% on their own) won't work.  ETA: At a 45 degree angle, there is minimal hidden supports, and in the threads a bit, but soluble support material should allow you to get it out enough, then it would be jelly like and turn it on with built-in thread locker
|
Strong men create good times. Good times breed weak men. Weak men create hard times. Hard times breed strong men.
|
Originally Posted By pokey074: https://www.ar15.com/media/mediaFiles/1073/7B9913F7-E7FE-46EF-9B34-433D41532E40_jpe-1790782.JPG Can anyone make me a cupholder insert? I will gladly pay you for your time/materials. Here's what I'm looking for: Base 3" outside diameter, 4" tall. That fits in my existing cupholder. Top part needs to be right around 3.75" inside diameter, Transition doesn't necessarily need to be angled. Base edges can be chamfered. Ive tried a couple of things from Amazon but none of them are tall enough in the base. Thanks in advance. No one? Base doesn't have to be solid. In fact, it would make more sense if it wasn't. |
|
Originally Posted By jsucraig: I have a Remington V3 Tactical that I want t o put a Magpul SGA 870 Stock on. The Remington Tac-13 (V3) uses the same birds head grip as the Tac-14 (870) by using an adapter. An Arf buddy has leant me his adapter to have fabricated. The machinist I was going to use said he could do it but it would be expensive. A guy that I work with said he had a friend that could 3d print anything so I gave it to him. A month later the part comes back and 'Mr. I can 3d print anything' says he would need to purchase a new program and probably a new computer to run it. Even then he may not be able to use his 3d printer. Has anybody here done this sort of thing or would they be interested in it? I have one other person locally the may be able to machine a new adapter. If not that's my 3 strikes and I'm out. @PNFLDS https://www.ar15.com/media/mediaFiles/176597/IMG_1948_JPG-1879247.JPG https://www.ar15.com/media/mediaFiles/176597/IMG_1949_JPG-1879249.JPG https://www.ar15.com/media/mediaFiles/176597/IMG_1950_JPG-1879251.JPG https://www.ar15.com/media/mediaFiles/176597/IMG_1951_JPG-1879252.JPG https://www.ar15.com/media/mediaFiles/176597/IMG_1952_JPG-1879253.JPG Anyone? |
Team Member since 11NOV2010 courtesy of TheRocketmac, Thank You Sir.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
Easily irritated engineer of odd things
Joined:
Jul 2008
Posts:
17153
EE: 100% (5)
MN, USA
|
Originally Posted By jsucraig: Anyone? |
Strong men create good times. Good times breed weak men. Weak men create hard times. Hard times breed strong men.
|
Originally Posted By Rat_Patrol: CAD is going to be the issues, unless you can find files somewhere to print. That is a LOT of cad time to model that up, and you would need either very detailed measurements or a physical item to copy. You are probably looking at 6-8 hours of CAD time, figuring in a few revisions. I have the part, somebody shoot me a PM |
Team Member since 11NOV2010 courtesy of TheRocketmac, Thank You Sir.
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.”-George Orwell
I'd suck those toes until her tits inverted
|
How about one of these? I got a sticky ball valve... https://www.thingiverse.com/thing:4141224/files |
|
would someone be willing to model me up a m11/9 mag catch? i have the machinist drawing with all specs. i have a ender3 3d printer, so i would just need the stl file when you were done, or upload to thingiverse, and send me a link. please pm me if interested. ill send you the drawing. |
|
Does the piece in red look like something someone here could make? I need it to finish my build but the author of the project didn't include the file with it. Attached File I just need a file that I can drop into my slicer. The project is thing:4786317. Thank you. |
|
Originally Posted By MajorPayne: Does the piece in red look like something someone here could make? I need it to finish my build but the author of the project didn't include the file with it. https://www.ar15.com/media/mediaFiles/481318/Screenshot_5_png-1908431.JPG I just need a file that I can drop into my slicer. The project is thing:4786317. Thank you. You sure this magwell file is not correct? https://cdn.thingiverse.com/assets/ba/b8/2f/be/63/p80_magwell_g19.stl |
post_count += 1
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
PGP: 912E3E9A194DED4E47DA0BA9D593AD70C8C12B9C
|
Originally Posted By scul: You sure this magwell file is not correct? https://cdn.thingiverse.com/assets/ba/b8/2f/be/63/p80_magwell_g19.stl Originally Posted By scul: Originally Posted By MajorPayne: Does the piece in red look like something someone here could make? I need it to finish my build but the author of the project didn't include the file with it. https://www.ar15.com/media/mediaFiles/481318/Screenshot_5_png-1908431.JPG I just need a file that I can drop into my slicer. The project is thing:4786317. Thank you. You sure this magwell file is not correct? https://cdn.thingiverse.com/assets/ba/b8/2f/be/63/p80_magwell_g19.stl That should work, thank you! |
|
I need an M203 handguard in 1/3 scale for my sons Bday. Shoot me an IM if your able and interested. Attached File |
| Since I have absolutely no cad skills I want to ask if someone could help me modify a part? What I have is a box for printer control board. It has two mounting tabs on its side for mounting to the Z axis extrusion. They might be strong enough but I would like to add a 3rd mount on the bottom. |
WELCOME to The Forums at Brownells.com - Sorry about your wallet.
Humor died of COVID19
Humor died of COVID19