[ARCHIVED THREAD] - Unmolested Cold War Rifle (Page 1 of 2)
Posted: 5/26/2011 8:54:29 PM EDT
|
Hello again folks.
Here is my Polish Mosin Nagant carbine. I bought the rifle brand new and in the grease. It is in marvellous condition. 
I just thought I would explain what I plan to do with this rifle. I plan to keep it clean and lightly lubricated always. And here is what I will not do: 1. I will never try to blow the rifle up. Not with overloads, C4 or dynamite. 2. I will never apply schmoe-kote or any other disgusting paint to this rifle. I will leave the blueing alone. 3 I will not install a plastic stock. I know that a stock made of recycled toothbrush handles appeals to some people. But not to me. The original stock will stay. 4. I will not drill and tap the receiver for a scope. I have other scoped rifles. 5. I will not glue rails to this rifle. And I will not install a $29.95 red dot sight to this rifle. I know red dot sights look cool; however, I don't care. I'm an old codger. 6. I will not install a flash suppressor because the muzzle flash from this piece is part of its charm. 7. I will only shoot my own gentle handloads through this piece––44 grains of IMR 4064 with the 150 grain .311" Sierra bullet. 8. Finally, here in northern Alberta the term "Tapco" is used as a curse, as follows: "It is a cheaply made tapco piece of clinton" That is all. Fluffy. P.S. Don't be a schmoe. |
|
I have a '46 carbine that got to me in new/unfired condition. Hell, the stock was unfinished. It's like they slapped it together, dunked it in cosmoline and stored it. Fitty buck, too.
Although I don't consider the Mosin Nagant to be a 'Cold War' rifle. SKS and AK-47, 74, etc, yeah. |
|
Quoted:
I also forgot to mention that also I will not try to dissolve the rifle in acid, nor will I try to bury it under a pile of manure. I just plan on shooting it and carefully cleaning it. And I will not boil it either. How refreshing. Good to see it's found a good home. "Tapco piece of clinton". Snort. |
|
Quoted:
Hello again folks. Here is my Polish Mosin Nagant carbine. I bought the rifle brand new and in the grease. It is in marvellous condition. http://i641.photobucket.com/albums/uu138/Fluffy9lives/168-2.jpg I just thought I would explain what I plan to do with this rifle. I plan to keep it clean and lightly lubricated always. And here is what I will not do: 1. I will never try to blow the rifle up. Not with overloads, C4 or dynamite. 2. I will never apply schmoe-kote or any other disgusting paint to this rifle. I will leave the blueing alone. 3 I will not install a plastic stock. I know that a stock made of recycled toothbrush handles appeals to some people. But not to me. The original stock will stay. 4. I will not drill and tap the receiver for a scope. I have other scoped rifles. 5. I will not glue rails to this rifle. And I will not install a $29.95 red dot sight to this rifle. I know red dot sights look cool; however, I don't care. I'm an old codger. 6. I will not install a flash suppressor because the muzzle flash from this piece is part of its charm. 7. I will only shoot my own gentle handloads through this piece––44 grains of IMR 4064 with the 150 grain .311" Sierra bullet. 8. Finally, here in northern Alberta the term "Tapco" is used as a curse, as follows: "It is a cheaply made tapco piece of clinton" That is all. Fluffy. P.S. Don't be a schmoe. 
|
|
I bought the piece from P&S Militaria in Quebec. It was the only one that he had. Apparently some collector had it stashed away since the mid 1980s. I owned another Polish Model 44 carbine back in 1984. I bought it from Century International Firearms in Montreal––back in those days they had an office in Montreal. Back then my 44 carbine cost around 60 bucks. Anyway, I'm glad I have another one. |
They got any more that nice?
There's a reason you were able to find one of those in "new" condition.  Nobody gives a shit about your stupid, useless 60 year old pierogi rifle that you can't find ammunition for because it was such an abortion that nobody every really adopted it because they realized, unlike you, that it was a massive piece of crap. See, what you need to ditch that abomination and get yourself one of these bad machines:  Than you can buy one of these and be cool, like me:  And than, you can ditch that 210 and really crank up the heat with one of these:  BOO-YEAH! First Hi-point every imported into Canada. I'm the only guy that can say that, and trust me, I tell EVERYONE who will listen. ETA: Don't worry about the 229 Elite with CTC grips....I mean, it'll only out-shot anything you own, hands down.....but it's not some obscure Eastern European piece of junk that you can't find ammo for. You wouldn't be interested. Take Care, Fluffster.  |
|
Quoted:
There's a reason you were able to find one of those in "un-fired" condition.
Nobody gives a shit about your stupid, useless 60 year old pirogi rifle that you can't find ammunition for because it was such an abortion that nobody every really adopted it because they realized, unlike you, that it was a massive piece of crap. See, what you need to ditch that abomination and get yourself one of these bad machines: http://img688.imageshack.us/img688/6105/dsc00742ib.jpg Than you can buy one of these and be cool, like me: http://img135.imageshack.us/img135/8394/p1040441m.jpg And than, you can ditch that 210 and really crank up the heat with one of these: http://img541.imageshack.us/img541/2662/p1040398b.jpg BOO-YEAH! First Hi-point every imported into Canada. I'm the only guy that can say that, and trust me, I tell EVERYONE who will listen. Nevermind, the invasion will continue as planned... This madman must be stopped. |
|
Quoted: Quoted: There's a reason you were able to find one of those in "un-fired" condition. Nobody gives a shit about your stupid, useless 60 year old pirogi rifle that you can't find ammunition for because it was such an abortion that nobody every really adopted it because they realized, unlike you, that it was a massive piece of crap. See, what you need to ditch that abomination and get yourself one of these bad machines: http://img688.imageshack.us/img688/6105/dsc00742ib.jpg Than you can buy one of these and be cool, like me: http://img135.imageshack.us/img135/8394/p1040441m.jpg And than, you can ditch that 210 and really crank up the heat with one of these: http://img541.imageshack.us/img541/2662/p1040398b.jpg BOO-YEAH! First Hi-point every imported into Canada. I'm the only guy that can say that, and trust me, I tell EVERYONE who will listen. Nevermind, the invasion will continue as planned... This madman must be stopped.  |
|
Quoted: There's a reason you were able to find one of those in "new" condition. Nobody gives a shit about your stupid, useless 60 year old pirogi rifle that you can't find ammunition for because it was such an abortion that nobody every really adopted it because they realized, unlike you, that it was a massive piece of crap. See, what you need to ditch that abomination and get yourself one of these bad machines: http://img688.imageshack.us/img688/6105/dsc00742ib.jpg Than you can buy one of these and be cool, like me: http://img135.imageshack.us/img135/8394/p1040441m.jpg And than, you can ditch that 210 and really crank up the heat with one of these: http://img541.imageshack.us/img541/2662/p1040398b.jpg BOO-YEAH! First Hi-point every imported into Canada. I'm the only guy that can say that, and trust me, I tell EVERYONE who will listen. ETA: Don't worry about the 229 Elite with CTC grips....I mean, it'll only out-shot anything you own, hands down.....but it's not some obscure Eastern European piece of junk that you can't find ammo for. You wouldn't be interested. Take Care, Fluffster. Do they even have pierogis in CAN?   |
|
Quoted:
There's a reason you were able to find one of those in "new" condition.
Nobody gives a shit about your stupid, useless 60 year old pierogi rifle that you can't find ammunition for because it was such an abortion that nobody every really adopted it because they realized, unlike you, that it was a massive piece of crap. See, what you need to ditch that abomination and get yourself one of these bad machines: http://img688.imageshack.us/img688/6105/dsc00742ib.jpg Than you can buy one of these and be cool, like me: http://img135.imageshack.us/img135/8394/p1040441m.jpg And than, you can ditch that 210 and really crank up the heat with one of these: http://img541.imageshack.us/img541/2662/p1040398b.jpg BOO-YEAH! First Hi-point every imported into Canada. I'm the only guy that can say that, and trust me, I tell EVERYONE who will listen. ETA: Don't worry about the 229 Elite with CTC grips....I mean, it'll only out-shot anything you own, hands down.....but it's not some obscure Eastern European piece of junk that you can't find ammo for. You wouldn't be interested. Take Care, Fluffster.
Please stay in Canada and out of any countries that matter. |
|
Quoted:
Quoted:
There's a reason you were able to find one of those in "new" condition.
Nobody gives a shit about your stupid, useless 60 year old pierogi rifle that you can't find ammunition for because it was such an abortion that nobody every really adopted it because they realized, unlike you, that it was a massive piece of crap. See, what you need to ditch that abomination and get yourself one of these bad machines: http://img688.imageshack.us/img688/6105/dsc00742ib.jpg Than you can buy one of these and be cool, like me: http://img135.imageshack.us/img135/8394/p1040441m.jpg And than, you can ditch that 210 and really crank up the heat with one of these: http://img541.imageshack.us/img541/2662/p1040398b.jpg BOO-YEAH! First Hi-point every imported into Canada. I'm the only guy that can say that, and trust me, I tell EVERYONE who will listen. ETA: Don't worry about the 229 Elite with CTC grips....I mean, it'll only out-shot anything you own, hands down.....but it's not some obscure Eastern European piece of junk that you can't find ammo for. You wouldn't be interested. Take Care, Fluffster.
Please stay in Canada and out of any countries that matter. Looking at the first photo in your group and where in the fuck do you live and shoot where prople take pot shot at the benches like in the picture ? I do not want to be around that type of range and shooters |
|
Try these: http://www.sgammo.com/product/surplus/500rd-can-762x54r-czech-46gr-short-range-loose-pack
Apparently .22mag - like recoil, awesomely huge muzzleflash
|
|
Quoted:
Quoted:
Quoted:
There's a reason you were able to find one of those in "un-fired" condition.
Nobody gives a shit about your stupid, useless 60 year old pirogi rifle that you can't find ammunition for because it was such an abortion that nobody every really adopted it because they realized, unlike you, that it was a massive piece of crap. See, what you need to ditch that abomination and get yourself one of these bad machines: http://img688.imageshack.us/img688/6105/dsc00742ib.jpg Than you can buy one of these and be cool, like me: http://img135.imageshack.us/img135/8394/p1040441m.jpg And than, you can ditch that 210 and really crank up the heat with one of these: http://img541.imageshack.us/img541/2662/p1040398b.jpg BOO-YEAH! First Hi-point every imported into Canada. I'm the only guy that can say that, and trust me, I tell EVERYONE who will listen. Nevermind, the invasion will continue as planned... This madman must be stopped.
It won't be hard because the last time I checked, the Canadians were all in Texas, some say they are trying to out number the Mexicans. We are getting it from both sides. |
|
Quoted:
There's a reason you were able to find one of those in "new" condition.
Nobody gives a shit about your stupid, useless 60 year old pierogi rifle that you can't find ammunition for because it was such an abortion that nobody every really adopted it because they realized, unlike you, that it was a massive piece of crap. See, what you need to ditch that abomination and get yourself one of these bad machines: http://img688.imageshack.us/img688/6105/dsc00742ib.jpg Than you can buy one of these and be cool, like me: http://img135.imageshack.us/img135/8394/p1040441m.jpg And than, you can ditch that 210 and really crank up the heat with one of these: http://img541.imageshack.us/img541/2662/p1040398b.jpg BOO-YEAH! First Hi-point every imported into Canada. I'm the only guy that can say that, and trust me, I tell EVERYONE who will listen. ETA: Don't worry about the 229 Elite with CTC grips....I mean, it'll only out-shot anything you own, hands down.....but it's not some obscure Eastern European piece of junk that you can't find ammo for. You wouldn't be interested. Take Care, Fluffster.
|
|
Quoted:
Hello again folks. Here is my Polish Mosin Nagant carbine. I bought the rifle brand new and in the grease. It is in marvellous condition. http://i641.photobucket.com/albums/uu138/Fluffy9lives/168-2.jpg I just thought I would explain what I plan to do with this rifle. I plan to keep it clean and lightly lubricated always. And here is what I will not do: 1. I will never try to blow the rifle up. Not with overloads, C4 or dynamite. 2. I will never apply schmoe-kote or any other disgusting paint to this rifle. I will leave the blueing alone. 3 I will not install a plastic stock. I know that a stock made of recycled toothbrush handles appeals to some people. But not to me. The original stock will stay. 4. I will not drill and tap the receiver for a scope. I have other scoped rifles. 5. I will not glue rails to this rifle. And I will not install a $29.95 red dot sight to this rifle. I know red dot sights look cool; however, I don't care. I'm an old codger. 6. I will not install a flash suppressor because the muzzle flash from this piece is part of its charm. 7. I will only shoot my own gentle handloads through this piece––44 grains of IMR 4064 with the 150 grain .311" Sierra bullet. 8. Finally, here in northern Alberta the term "Tapco" is used as a curse, as follows: "It is a cheaply made tapco piece of clinton" That is all. Fluffy. P.S. Don't be a schmoe. Nice. |
|
You shouldn't shoot it as designed then...
I have a '54 of the unissued Polish batch. They were imported by Intrac, and sold for about $159 around here. They are indeed the finest M44s ever made, but if you shoot it with the bayonet extended (as was the procedure), you will erode the finish off the bayonet quite quickly. |
|
Quoted:
There's a reason you were able to find one of those in "new" condition.
Nobody gives a shit about your stupid, useless 60 year old pierogi rifle that you can't find ammunition for because it was such an abortion that nobody every really adopted it because they realized, unlike you, that it was a massive piece of crap. See, what you need to ditch that abomination and get yourself one of these bad machines: http://img688.imageshack.us/img688/6105/dsc00742ib.jpg Than you can buy one of these and be cool, like me: http://img135.imageshack.us/img135/8394/p1040441m.jpg And than, you can ditch that 210 and really crank up the heat with one of these: http://img541.imageshack.us/img541/2662/p1040398b.jpg BOO-YEAH! First Hi-point every imported into Canada. I'm the only guy that can say that, and trust me, I tell EVERYONE who will listen. ETA: Don't worry about the 229 Elite with CTC grips....I mean, it'll only out-shot anything you own, hands down.....but it's not some obscure Eastern European piece of junk that you can't find ammo for. You wouldn't be interested. Take Care, Fluffster.
I keep inviting you to go shooting together. As I said earlier, you can shoot anything in our collection. And bring the Hi Point. We could use it as a target. And you will see what real accuracy from a pistol is all about. A SIG P210 will shoot a one inch group from a rest at 50 meters. And a Finnish Lahti L-35 will shoot even better than that. Anyway on a daily basis I plan on posting pictures of unmolested classics. And finally Mr. TargetTarget, I fear that the day will come when the international AR15.com tribunal will put you on trial just like that guy in Bosnia. |
|
Quoted:
The C & R forum is basically the MN forum now but I still have to see MN's in GD? Sigh No you don't, you always have the option of NOT clicking on a thread or not reading a thread after you first learn it has something in it you don't want to read about. Or....................you could whine instead.
|
|
Quoted:
Quoted:
The C & R forum is basically the MN forum now but I still have to see MN's in GD? Sigh No you don't, you always have the option of NOT clicking on a thread or not reading a thread after you first learn it has something in it you don't want to read about. Or....................you could whine instead. Ummmm the thread title says nothing about MN's. |
|
Quoted:
The C & R forum is basically the MN forum now but I still have to see MN's in GD? Sigh This thread is more about keeping a classic firearm original. This thread this to decry the monstrous actions of the infamous Bubba and his notorious Canadian cousin. And this thread is also a protest against all those schmoes who are not happy until they've poisoned their rifle with tapco. |
|
Quoted:
Hello again folks. Here is my Polish Mosin Nagant carbine. I bought the rifle brand new and in the grease. It is in marvellous condition. http://i641.photobucket.com/albums/uu138/Fluffy9lives/168-2.jpg I just thought I would explain what I plan to do with this rifle. I plan to keep it clean and lightly lubricated always. And here is what I will not do: 1. I will never try to blow the rifle up. Not with overloads, C4 or dynamite. 2. I will never apply schmoe-kote or any other disgusting paint to this rifle. I will leave the blueing alone. 3 I will not install a plastic stock. I know that a stock made of recycled toothbrush handles appeals to some people. But not to me. The original stock will stay. 4. I will not drill and tap the receiver for a scope. I have other scoped rifles. 5. I will not glue rails to this rifle. And I will not install a $29.95 red dot sight to this rifle. I know red dot sights look cool; however, I don't care. I'm an old codger. 6. I will not install a flash suppressor because the muzzle flash from this piece is part of its charm. 7. I will only shoot my own gentle handloads through this piece––44 grains of IMR 4064 with the 150 grain .311" Sierra bullet. 8. Finally, here in northern Alberta the term "Tapco" is used as a curse, as follows: "It is a cheaply made tapco piece of clinton" That is all. Fluffy. P.S. Don't be a schmoe. What you need to do is throw it down your driveway to give it that "battlefield" look.
|