Could You Have Stopped This? Vegas Shooting Analysis with Attorneys on Retainer

[ARCHIVED THREAD] - feed ramp

Posted: 7/26/2001 7:47:55 PM EDT

what part do you dremel smooth out ,my rounds are hitting just below the feed ramp

Posted: 7/26/2001 8:26:10 PM EDT

[#1]

1.What type of gun????
2.Dremels are OK for polishing a feed ramp
but changing the contour can
be a very bad idea.

Posted: 7/26/2001 8:31:54 PM EDT

[#2]

I'd try different mags (if you hav'nt already) before I'd get the Dremel out.

Posted: 7/26/2001 8:57:42 PM EDT

[#3]

ar-15

Posted: 7/26/2001 8:58:53 PM EDT

[#4]

yes , I did try two types of mags

Posted: 7/27/2001 1:45:33 AM EDT

[#5]

Your problem is *probably* still mag related, unless, possibly the barrel extension it protruding through the upper. It should be just about flush.

Is it a .223 or a 7.62X39 AR? It's not too common in the .223 but pretty common in the X39.

[ARCHIVED THREAD] - feed ramp

Warning

Confirm Action

[ARCHIVED THREAD] - feed ramp

[ARCHIVED THREAD] - feed ramp