Posted: 5/21/2015 8:54:31 PM EDT
|
I just bought a 22/45 this week and decided to take it apart, but I'm having some problems.
1. A magazine will not easily fit into the magwell. It inserts about 1.5", then meets resistance. I have to give it a good whack to insert the rest of the way. 2. It will not dryfire when the magazine is inserted. 3. The bolt will only retract about 1", then it meets resistance, and I have to pull very hard to get it to open all the way. One fully pulled back, it sticks held open and I have to give it a light hit for it to return to battery. When it is stuck open, the slide stop freely moves up and down, so it is stuck past the point of where the slide stop engages. 4. The mainspring will only pull back about 1/2" before it meets a wall of resistance. I cant easily force it past this point. What the heck is going on? |
|
That doesn't help, and neither does their troubleshooting page. |
|
I'm glad I found this. I have a brand new 22/45 that I got in trade from a buddy several years ago. I forgot I even had it until last week when I was digging through one of my safes. I'm experiencing everything the OP was. I too it out a few days ago and couldn't get it to fire. I'll try this trick and report back.
Thanks fellers... 
|