Posted: 12/13/2009 4:31:29 PM EDT
|
Hello,
Does anyone know where I can find HK trigger springs to turn my P2000 LEM V2 into V1? I want to give a lighter trigger pull a try. Thanks! |
|
HK or Gun Parts Corp. Part numbers are listed on HKPRO forums, reference section, LEM conversion and Light LEM conversion threads. To go completely to V1 LEM you also need the firing pin block spring. Just the TRS spring will give you the V4 variant, at about 6 pounds. You must replace both springs if you want the 5 pound pull.
TRS spring lowers it about 2 pounds. FPB spring lowers it by about a pound. |
|
Thanks for the help! I got some springs from HK directly.
Now, the only issue is how to install them! I am trying to get the trigger rebound spring in and I can't seem to get the bolt back in. I got the legs lined up but it sits too high and does not line up with the push pin. Does anyone have some tips? I am sure once I find the trick I will realize how easy it probably is. Thanks. |
|
It can help if you have an extra hand, but if not you need some patience and once it goes it you will be amazed why did it not do that the other 300 tries and the 7 or 8 trips on the ground looking for that little fucker.
I used a small punch to hold it in place once I got it close. It still sat up pretty high so I used a pencil eraser side and pushed down untill it lined up then I inserted the pin and pushed the punch out with the pin. I hope this helps |