Posted: 3/2/2013 12:31:18 PM EDT
|
I just replaced my 92FS poly trigger and spring with the steel trigger and Wolff reduced-power spring, and the trigger doesn't always fully return to its DA position when dry firing. When I dry fire and cock the slide while holding the trigger down, the SA reset is fine. I have a factory Beretta "D" spring and the Elite skeleton hammer, if that matters. Any ideas? Should I get the regular or extra power Wolff spring?
eta: http://www.youtube.com/watch?v=Nyl3Woqzy1Y&feature=youtu.be It might take a while to upload, so take a nap and come back later. 
|
|
Before you change the spring, are you sure there's no binding or rough marks the new steel trigger asy is perhaps catching on? I believe I recall reading once that the trigger channel the polymer triggers were made for is a hair more narrow than the older ones with a steel trigger asy?
If that issue has been eliminated as a potential problem, how much lube are you running on the gun's guts? I always drop a bit of lube on the trigger to smooth things along. This is the first time I've ever heard of this sort of problem, FWIW. |