Posted: 4/19/2010 10:36:03 AM EDT
| Does anyone make a threaded barrel for the P2000? |
|
You're awesome. Thanks. Are they good barrels? Just read a little on their website and they seem like top notch barrels. |
| The threads are not always concentric to the bore (they stated they do not QC check if it is concentric). Send the original barrel to Tornado Technologies, they will extend and thread it right. Most who shoot suppressed (myself included) will not touch an EFK threaded barrel. The quality is not up to par, and you can destroy the baffles in a suppressor if the threads are bad. Some folks on the other hand, have had good luck with them. Your mileage may vary. |
|
Quoted:
You're awesome. Thanks. Are they good barrels? Just read a little on their website and they seem like top notch barrels. No prob  I was like you and just getting the skinny from the website....they were rec'd to me by some range pals, both the two spoke very highly of them...and they are not tooo pricey.
OHH snap, somebody is a guinea pig.....not it 
|
|
Quoted:
The threads are not always concentric to the bore (they stated they do not QC check if it is concentric). Send the original barrel to Tornado Technologies, they will extend and thread it right. Most who shoot suppressed (myself included) will not touch an EFK threaded barrel. The quality is not up to par, and you can destroy the baffles in a suppressor if the threads are bad. Some folks on the other hand, have had good luck with them. Your mileage may vary. I've dealt with them before. Great guys. If I can't find another brand then I'll probably buy one and send it to them to have it checked. |