Posted: 6/29/2014 11:00:26 AM EDT
| Anyone use a GROUP gripper |
| I have a full length Wilson group gripper rod in a 1911 I built from the ground up. It has performed flawlessly since finished. Way to many rounds to count over the years. Since it was installed as the first and only rod in the gun I can't say anything about how much it has enhanced the group, but the gun groups tighter than any other 1911 I own including my TRP Operator Tactical and Range Officer.. I have picked off blackbirds from the top of my 50 yard target stand with that gun many times with 1 shot of 230gr hardball. Not much info I know but it has been my experience with it. Some day I may temporarily switch it out with a GI set up or something else so I can compare the difference, but it shoots so good I really don't want to....LOL |
|
Here is the problem: If your gun shoots better (accuracy wise) you have bigger problems that a group gripper is going to fix. It might work on the symptoms by hiding them and that is not good.
If this thing helps with getting your barrel to lock-up with the slide better... you NEED to get someone to work on that lock-up Like: Longer link Weld up and fit the feet on the bottom of the barrel Do something about dwell time: More lug engagement stronger main spring and longer (towards the bottom) firing pin retainer. Accuracy is best achieved by a good barrel that is properly fitted. To the bushing, frame, and the barrel hood and slide. Remember brass should eject and land at 3 o" clock if it is landing farther back increase your recoil spring weight. Most should shoot 18 1/2 lbs. with the ammo today. |