Posted: 4/12/2010 3:54:24 PM EDT
|
So my pm9's slide is not fully sliding forward unless you pull it all the way back and left it fly forward. It's like it gets stuck just past the slide lock if you were sending the slide forward. It does both loaded with a mag and without a mag inserted. Ive torn it down and cannot seen any problems. So just to recap, if you were to pull the slide to the rear and ride it forward it stops just after the slide release.
thanks |
|
It has a little over 500 rnds, so they guy I purchased it from tells me, not showing much wear.
That's a negative on the gripping hand pushing the slide release up. I contacted kahr today, explained what was occurring. He asked if there was any pinging on the barrell and I noticed a small raised lip on the forward portion of the chamber which they believe is causing the problem so I get to send it in. Thanks |