Posted: 3/2/2013 5:46:49 PM EDT
|
Will a 34 slide release work on a 19? Or how about a 21?
New to glocks. |
|
Quoted:
Make sure both are either 3 pin or both 2 pin frames. Cant put one from a 2 pin in a 3 pin and vice-versa. 3-pin slide release fits fine on a 2-pin Glock, and if you cut the triangle tab off the 2-pin slide release, it'll fit the 3-pin frame. ETA: you may have to tweak the spring a little. |
| The 2 pin G19 actually uses the same slide stop as the 3 pin. It's only the 2 pin G17 that uses a different slide stop. So as long as the G34 is a 3 pin (did they ever make any in 2 pin?) then the slide stop will fit in a G19. I'm not certain about the G21, but it appears that there are different part numbers for the 9mm/.40/.357sig slide stops and the .45/10mm ones, so probably not. |