TNVC: NEW and Exclusive Filmed SuperGain (FSG) Image Intensifier Tubes & Chimera Pano Giveaway!!

[ARCHIVED THREAD] - wilson trigger question

Posted: 4/29/2007 6:39:52 AM EDT

I just put a Wilson Combat match trigger on my SA Mil-Spec.The pins that mount the trigger to the Stirrup are visible.I just didn't know if I could adjust it or not .

Posted: 4/29/2007 8:07:26 AM EDT

[#1]

Here is pic

Posted: 4/29/2007 8:08:50 AM EDT

[#2]

Here is pic

Posted: 4/29/2007 8:10:44 AM EDT

[#3]

sorry Ill try one more time.

" border=0 id=img>

Posted: 4/29/2007 8:12:19 AM EDT

[#4]

I can't get the image to load.

Posted: 4/29/2007 9:48:28 AM EDT

[#5]

Posted: 4/29/2007 3:38:14 PM EDT

[#6]

Thank you SGB.

Posted: 4/30/2007 9:46:42 PM EDT

[#7]

Is the trigger adjustable so the pins do not show?

Posted: 4/30/2007 10:25:35 PM EDT

[#8]

If the trigger has an overtravel adjustment there will usually be a set screw installed into the face of the trigger at the bottom of the three holes in the trigger. You'll need an allen wench of the correct size to adjust that set screw in or out as needed. If there is no hole on the face of the trigger and no set screw then that trigger is probably not an adjustable one.

Posted: 5/1/2007 9:39:00 AM EDT

[#9]

It is adjustable but how will that make the pins not visible?

Posted: 5/1/2007 10:32:44 AM EDT

[#10]

Quoted:
It is adjustable but how will that make the pins not visible?

it wont. the above post was meaning less in reference to your issue.

Posted: 5/2/2007 4:10:10 AM EDT

[#11]

Personally, i usually use the lightweight trigger. it`s more expensive, but you can feel the difference. btw, chip mckormick has a lightweight too, now. the cost is in line. no rivit holes......

Posted: 5/2/2007 7:15:03 AM EDT

[#12]

I was going to order the chip McCormick but brownells did not stock them anymore and they were out of stock everywhere else I looked.

Posted: 5/2/2007 9:06:39 AM EDT

[#13]

Take some J-B Weld and fill the holes............. take care that you don't have to sand the sides, so don't get sloppy. Next Sharpie sells a permenant marker that is called "matallic Silver" and it is a perfect match to the color of the trigger. Just make four dots or dabs with the marker pen and you are all done.

JF.

Posted: 5/2/2007 10:09:53 PM EDT

[#14]

I thought about doing that but I want the trigger black anyway so when I do the beavertail I will refinish the trigger to.

[ARCHIVED THREAD] - wilson trigger question

Warning

Confirm Action

[ARCHIVED THREAD] - wilson trigger question

[ARCHIVED THREAD] - wilson trigger question