Posted: 12/22/2008 2:01:16 PM EDT
|
was just wondering about blueprinting for a remmy 700 (.308)
can anyone recomend where to get it done, i know theres a few places that 'can' do it, but always i prefer to be refered by good results from people who have had it done 
|
|
Quoted:
was just wondering about blueprinting for a remmy 700 (.308) can anyone recomend where to get it done, i know theres a few places that 'can' do it, but always i prefer to be refered by good results from people who have had it done
'Blueprinting' or do you mean accurising? Tightening up a factory action is not blueprinting, for that you need a set of drawings (blueprints) to work to. Tightening/truing the action is not too hard and great results can be had. Speak to Mark, he has the kit. |
I thought that he used a big adjustable spanner.
Scope eye Why not call it Blueprinting intead of accurizing same result just different terminology? You DONT require the actual blueprints to re-work a part be it a gun part or even race engine part.All we are talking about here is tightening factory production tolerances,just dont think there is any need to try and cum the smart arse,as what tends to happens arses get shown to look like a twat 
|
|
Quoted:
I thought that he used a big adjustable spanner.
You DONT require the actual blueprints to re-work a part be it a gun part or even race engine part.All we are talking about here is tightening factory production tolerances,just dont think there is any need to try and cum the smart arse,as what tends to happens arses get shown to look like a twat Umm without the manufacturers drawings how does one know what the optimum dimensions would be for each part? |
|
Quoted:
I thought that he used a big adjustable spanner.
Scope eye Why not call it Blueprinting intead of accurizing same result just different terminology? You DONT require the actual blueprints to re-work a part be it a gun part or even race engine part.All we are talking about here is tightening factory production tolerances,just dont think there is any need to try and cum the smart arse,as what tends to happens arses get shown to look like a twat Bit strong, you obvousley don't know of scope-eye, he knows exactly what he's talking about and is no 'arse' 
|
|
so if you haven't got a blueprint.. how exactly are you going to Blueprint an article?
Surely blue printing by it's name requires a blueprint... or it would be call pissing in the wind - printing.... I know of all the people on this board who i'd trust to do any work on my toys... and it wouldnt be someone who didnt know blue prints is required for blue-printin... Street fighter des not blue print because he doesn't have the blueprints to work from... He Plumbs using all the knowledge he has gleamed from many sources.. |
Strange what you say about having "Blueprints/Drawings" as haveing spent years developing and putting together Engines (and blueprinting) and drivetrains for little companys like Jordon F1,Subaru/Prodrive,WRC,Seat,Hewland,Pilbeam to name a few,i cant remember haveing to refer to "blueprints" when we took a std part and improved/modifed/re-engineerd it,but hay what do little teams/companys like that know
|
|
well that's not blue-printing,
that is design and development.... 
Blueprinting: The meticulous matching to factory specifications all parts and/or components. Hand-fitting parts to the absolute design callout or manufacturer's specifications looks like Blueprinting requires spec aka Drawings also known as Blueprints.... Having taught more than a few people from the industry I'll reserve MY judgement... |
|
no my experience of teaching people in the design and development fields of motorsport,
i've not been impressed by what i've seen, lets just put it that way, but they were all design engineers with degree's And for what it's worth, my reloads are pretty shit hot, 
eta 
|
|
OK, I know most on here would know what you meant by the term blueprinting, but seeing as there are only one or two here that could actually do the work there is a good chance that the job might go elsewhere. Now I know several riflesmiths with a reputation (good or bad doesn't matter, they still get a lot of work) that will 'blueprint' and use drawings and will charge well over the odds to boot for what the customer only wanted was an accurising job. One will even routinely throw away factory new Remington barrels without even looking at them as they are 'all shit' (I think you know who I mean, streetfighter )
I even have customers wanting the action 'blueprinted' to match a numbered drawing (possibly ringing me just after speaking to one of the other riflesmiths around) and don't want just a tightening job. You can get wildly differing prices for what you think is the same job but one will be for what you want the other won't be. |
|
Quoted:
Take it the boys you where teaching where junior engineers from the team "toys are us" then?? How's the weather back up in my old neck of the woods laaaaaaaa??  Being a brilliant engineer and being literate aren't mutually exclusive, or are they? By the way welcome to the board, get the beers in 
|
|
Quoted:
Really Tim why you say that?? Is that because he has loads of posts?? ANY person with a good basic engineering background could tell you that you dont need drawing to "Blueprint" a part/item. I don't give a flying fu*k what you call it, my point is I dont really think that it was necessary to word your post as you did.I think your put down of scope-eye,who is e respected RFD and gun plumber back fired and made you look a cu*t That is all
|
|
Quoted:
Really Tim why you say that?? Is that because he has loads of posts?? ANY person with a good basic engineering background could tell you that you dont need drawing to "Blueprint" a part/item. Number of posts is irrelevant. Look at me, I have way more than Scope-Eye and I know f+ck all  .....if you put quantity over quality you should be in government number crunching..
..anyway, stop arguing as it's still not too late to go on the naughty list.......and then you'll be crying tomorrow morning 
|
|
Tim
chill dont start swinging your dick mate,it might get caught on something Me a cunt no mate,he is not the only RFD in the world now is he If all you can do is pick holes in my spelling well crack on son,catch up with you on a range sometime soon will let my work and shooting do my talking for me
Sorry Icarus dont want to go in the corner as i dont like the dark 
Yep get the beers in,this looks like a fun place to be. |
|
Quoted:
Tim chill dont start swinging your dick mate,it might get caught on something Me a cunt no mate,he is not the only RFD in the world now is he If all you can do is pick holes in my spelling well crack on son,catch up with you on a range sometime soon will let my work and shooting do my talking for me
Sorry Icarus dont want to go in the corner as i dont like the dark
Yep get the beers in,this looks like a fun place to be. 
|
