Posted: 10/28/2013 2:37:55 PM EDT
| I live in the Dallas/ft. Worth area and although I own a very nice AR I would like to build my own using one of the 80% finished lowers available at several websites. I would be interested in any north Texas AR build party where the tools are available. Can any of you help me? |
|
with a cnc mill after you have it programed correctly its about 20 min :) for the first one then around 10 min each for the rest.Unless you have a cutter that busts or gals up. And if you have a couple of sets of jigs to drill the 3 holes you do those as the next one is being cnc ed
|
|
Quoted:
with a cnc mill after you have it programed correctly its about 20 min :) for the first one then around 10 min each for the rest.Unless you have a cutter that busts or gals up. And if you have a couple of sets of jigs to drill the 3 holes you do those as the next one is being cnc ed If someone's interested in setting something up, I've got one 80% lower and a set of jigs I'd be happy to bring. Assuming everything is legal. I know there's been some issues with "build parties" and the ATF. |
|
Quoted:
Not sure I understand, this is the Texas Home Town forum. Quoted:
Quoted:
post it in your hometown area. Much more likely to get a response. Not sure I understand, this is the Texas Home Town forum. Texas is a big state. A build party in Terlingua is probably of little use if he lives in Texarkana. Might want to narrow down the location. |
|
this will give you an Idea
http://www.youtube.com/watch?v=SYUfcxnDSWg |