Posted: 12/31/2013 3:10:43 PM EDT
|
It's getting to be near impossible to find powders these days. Primers and projectiles seem to be readily available fortunately.
So to kick the thread off, here's what the Buchheit in House Springs has on the shelf. Yes it's on the pricey side, but plenty of Benchmark and H335 among others. I bought a couple pounds of IMR 4198 to use for subsonic 300BLK loads, it works very well for that. 
|
|
Quoted:
Some I'm looking for if anybody spots them .. Lil Gun H110 Unique Titegroup Blue Dot 800-x Reloader 7 AA2200 ... you get the idea. All the ones that are impossible to find. If you have not tried Grafs in St Charles give them a call either they will have it or they can order it But it will come |
|
Quoted:
If you have not tried Grafs in St Charles give them a call either they will have it or they can order it But it will come Quoted:
Quoted:
Some I'm looking for if anybody spots them .. Lil Gun H110 Unique Titegroup Blue Dot 800-x Reloader 7 AA2200 ... you get the idea. All the ones that are impossible to find. If you have not tried Grafs in St Charles give them a call either they will have it or they can order it But it will come Was there last weekend, they didn't have anything I needed. And when I asked when they might be getting some Lil Gun or H110 in, the guy just gave me a look like I was on crack. |
|
I'm trying to find some W231 or HR38 in the KC area. I'd like to start working on some minor loads for my G35 so I can get the kinks worked out before USPSA starts up again.
I need to figure out a good plinking round for .38 special as well since I was all smart and bought 4 revolvers last year that I don't have any ammo for. Really I need everything as far as components go aside from brass. It has been hard convincing myself not to go ahead and get setup to cast and powdercoat bullets. Seeing everybody's setup over in the reloading forum makes me want to try to run before I can crawl. |
|
Just an FYI.......I've kept an eye on TJConvera.com, Powder Valley Inc, and Potters in St. Joseph and have been able to find powder and primers for friends.
I'm good on powder and primers for awhile.......but would love to see people posting where they are finding 9mm and .223 cases for reloading. I won't NEED any for awhile, but they are always nice to have ready. |
|
Quoted:
Just an FYI.......I've kept an eye on TJConvera.com, Powder Valley Inc, and Potters in St. Joseph and have been able to find powder and primers for friends. I'm good on powder and primers for awhile.......but would love to see people posting where they are finding 9mm and .223 cases for reloading. I won't NEED any for awhile, but they are always nice to have ready. How much prep do you want to do? Hi Tech has plenty of 223 brass on hand. No 9mm atm though |
|
Quoted:
How much prep do you want to do? Hi Tech has plenty of 223 brass on hand. No 9mm atm though Quoted:
Quoted:
Just an FYI.......I've kept an eye on TJConvera.com, Powder Valley Inc, and Potters in St. Joseph and have been able to find powder and primers for friends. I'm good on powder and primers for awhile.......but would love to see people posting where they are finding 9mm and .223 cases for reloading. I won't NEED any for awhile, but they are always nice to have ready. How much prep do you want to do? Hi Tech has plenty of 223 brass on hand. No 9mm atm though I usually pay a buddy to do all the prep |
|
Quoted:
I usually pay a buddy to do all the prep Quoted:
Quoted:
Quoted:
Just an FYI.......I've kept an eye on TJConvera.com, Powder Valley Inc, and Potters in St. Joseph and have been able to find powder and primers for friends. I'm good on powder and primers for awhile.......but would love to see people posting where they are finding 9mm and .223 cases for reloading. I won't NEED any for awhile, but they are always nice to have ready. How much prep do you want to do? Hi Tech has plenty of 223 brass on hand. No 9mm atm though I usually pay a buddy to do all the prep After doing 50ish of these 308s I got monday, I'm getting close to finding someone to just resize the damn things for me! |
|
Quoted:
When doing 308 you just gotta get organized. I just finished a 4500 piece project. Took 90 days of an hr here and an hr there. Took another 3 months to load them.. And no it's not illegal to load ammo in your home stalker bitch!! I really like the idea of this thread, but for it to work we need to keep it on topic of only posting in stock supplies. Or is it just that no one has seen any in-stock supplies? 
|
|
Quoted:
I don't suppose anyone's found any H110 in the STL area. I also don't suppose we could turn this into a components swap thread, could we? I bet most of us have extra this and not enough that. Nope, I've talked to a few places looking for it and Lil Gun. Fortunately I have 2 pounds of Lil Gun, but it'll run out soon. Just FYI, Denny Dennis has some CFE 223 - both in 1lb and 8lb jugs. We can make it a swap thread, and keep doing it until somebody shit cans the idea
|
|
My local store has over priced 8lbs cans of Promo, 700X, 1lbs cans of Accurate 4350, 4064, Xterminator. There is more, but I can't remember exactly what, I"ll find out and edit. This is in Thayer, MO
ETA: 8lbs Green Dot, 1 lbs AA Siloutte, Magnum, hogdon 50bmg, several flavors of Win. AA. |
|
I've gotten used to using IMR 4064 for my .223.
Got some 100 rnds of Barnes MPG 55gr over 23gr of 4064 to test out, need to get the vehicle back on the road so I can get somewhere to do so. Graffs tens to have a good amount of stuff, glad there's no longer a limit on primers. Need some large rifle for my 7.62x54r along with some .311 projectiles... |