Posted: 12/2/2012 8:02:14 PM EDT
| Company I work for in Quincy has a second shift millwright position open do to retirement , atleast one more will be going out the door around May , also sounds like there will be atleast 2 more position added in the next couple months. |
|
I'll just leave this here.
http://www.youtube.com/watch?nomobile=1&v=2Kn-XXNCG8o 
|
|
Every electrician I've dealt with seem to be like truck drivers and engineers, all odd ducks 
|
|
Don't get all prissy when you say everythings dead and I find a couple live lines with your Greenlee ratcheting cable cutters
Actually feel for some sparky , getting a machine ready to move and cut enough wire that you wouldn't be able to slip a 5 gal bucket over the bundle 
|
|
Quoted:
Don't get all prissy when you say everythings dead and I find a couple live lines with your Greenlee ratcheting cable cutters
Actually feel for some sparky , getting a machine ready to move and cut enough wire that you wouldn't be able to slip a 5 gal bucket over the bundle well here is a bit of advise for ya . more than likely if you needed a machine unhooked it would of been smart to have an electrician do it for you . now this is where you need to pay attention . I never ever take anybodys word that the power is off . I verify every thing before I start hacking wires . hopefully you didnt get hurt . and good for you your company is prospering enough to hire people . wish you the best of luck and be safe . remember it isnt dead if its not grounded. |