Posted: 7/7/2022 8:46:42 AM EDT
|
Have you heard any feedback on these? Finally got to test mine out and it was throwing everything left and in erratic groups. Took it off and I was able to shoot tight groups again with most holes touching each other. I don't see any signs of significant copper on the inside of the comp. Also does not want to stay tight against the barrel. Yes, I used a healthy glob of blue Loctite on both the retaining screws. |
| I think we figured out what's going on. The threads in the comp must be off a little bit. If you look through barrel you can see a slither of the comp in the 7-8 o'clock position. If you rotate the comp 180, you can see that slither at 2-3 o'clock. |
Distinguished Rifleman, President’s Hundred
Joined:
Oct 2010
Posts:
7891
EE: 100% (1)
USA
|
Originally Posted By wastegate: I think we figured out what's going on. The threads in the comp must be off a little bit. If you look through barrel you can see a slither of the comp in the 7-8 o'clock position. If you rotate the comp 180, you can see that slither at 2-3 o'clock. You’re making the assumption the concentricity issue is in the comp threading when it might be in the barrel threads. |
Fundamentally the marksman aims at himself.
— D.T. Suzuki
— D.T. Suzuki
|
If you look through barrel you can see a slither of the comp in the 7-8 o'clock position. If you rotate the comp 180, you can see that slither at 2-3 o'clock. If you look through barrel you can see a slither of the comp in the 7-8 o'clock position. If you rotate the comp 180, you can see that slither at 2-3 o'clock. Originally Posted By MemeWarfare: You’re making the assumption the concentricity issue is in the comp threading when it might be in the barrel threads. |