Posted: 6/12/2008 5:16:43 PM EDT
That probably hurt all the groups following. In your climate I don't think I would be messing with moly. www.sprinco.com/articles.html Pick up some Wipe-Out and keep the bore clean and make sure you get all the moly out.. www.paulcousa.com/wipeout.htm |
|
I did not use the suppressor for the test. The suppressor is a Gemtech M4-96D which has been converted to the G5 QD mount. I used this suppressor on my other AR as well as a .223 Remington 700. BTW, the LaRue has achieved better groups than the bolt action. ![]() I have not done a test to see if the point of impact changes with the suppressor attached. With my other AR-I did not detect any noticeable shift. |
|
Part 2- I went back out to do some more shooting. it was 56*f above, and the wind was out of the West, and I was shooting west. I shot prone off of a bipod at 100 yards, and did not shoot any moly bullets. I received the Troy BUIS from Larue, and planned to zero them. To my surprise they were right on the money at 25, and perfect and scored a 3.1" group which was 1.5 inches high at 100 yards! No need to touch a thing!! The 77grain blue box Black hills shot a 1.2 inch 10 shot group I then attached the Gemtech suppressor which resulted in a 10 shot 1.5 inch group which impacted 3.3 inches low. This surprised me, as I do not get much of an impact shift using the 11.5 inch barrel. Hornady 75 grn TAP FPD shot a 1.6 inch group American Eagle 55grn FMJ ( duty ammo) shot a 3.5 inch group and a 3.6 inch group. Next time out I need to do some 200 yrd shooting. |
|
Part 2- I went back out to do some more shooting. it was 56*f above, and the wind was out of the West, and I was shooting west. I shot prone off of a bipod at 100 yards, and did not shoot any moly bullets. I received the Troy BUIS from Larue, and planned to zero them. To my surprise they were right on the money at 25, and perfect and scored a 3.1" group which was 1.5 inches high at 100 yards! No need to touch a thing!! The 77grain blue box Black hills shot a 1.2 inch 10 shot group I then attached the Gemtech suppressor which resulted in a 10 shot 1.5 inch group which impacted 3.3 inches low. This surprised me, as I do not get much of an impact shift using the 11.5 inch barrel. Hornady 75 grn TAP FPD shot a 1.6 inch group American Eagle 55grn FMJ ( duty ammo) shot a 3.5 inch group and a 3.6 inch group. Next time out I need to do some 200 yrd shooting. No noticable shift of impact on the scope mounts!! |
|
Part 3 Today was 200 yard work! I shot off of a bipod while prone. I shot the Iron sights at 200. I shot 1 10 round group which was spot on! The group was 3.6 inches..and centered right on the 4 inch target. Shooting Federal 55 grn FMJ. I shot 2 10 shot groups with Black Hills Blue box 77grn loads. The first group was a 2.8 inch and the second was a 2.4 inch group. Overall very good preformance!! |









